Cabletron Systems SSIM-H2-02 manual Virtual Port Configuration, Status, Address Demand Aging Level

29

Status

Display only. Shows the current status of the port.

Value	Meaning
Down	The port is down.
Going Up	The port is enabled a protocol connection is being auto-
	negotiated.
Up	The port is up.

Table 4. Translational Switch Physical Port Status

Address Demand Aging Level

Sets the threshold on the number of entries in the address table on which entries are aged faster. Possible values are 50, 60, 70, 80, and 90 percent and Disabled.

Default: 90 percent

Trace Mask

Sets a bit mask for which messages are logged in the message log. Used mainly by Cabletron Systems support for debugging purposes.

Virtual Port Configuration

To configure a virtual port on a TS port, select Virtual Port Configuration on the Port Configuration menu of the TS port. If the TS port has more than one virtual port, a list of the corresponding CRFs appears from which the virtual port must be selected. The following menu options are available:

Enabled

Sets the administrative state of the virtual port to Yes or No.

Default: Yes

SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide Configuration