Cabletron Systems HSIM-W87 manual Commands, Help

Page 30

Chapter 4: Management

4.2.1Commands

The Network Tools function resides on the host platform and allows the user to access and manage network devices. Figure 4-2shows the Network Tools Help screen. Screens may be slightly different depending on the host platform and the version of firmware.

To access the Network Tools screen, access Local Management, then use the arrow keys to navigate to and highlight the NETWORK TOOLS menu item in the appropriate menu screen and press ENTER. The Network Tools Help screen displays. Refer to the host platform manual for details on accessing Local Management.

Type help at the prompt to list all the commands that are

TIP available for the device in the current operational mode. If help is needed with a specific command, typehelp and the <command>. Use lower case characters when entering commands in Network Tools. Uppercase characters may be specified for some of the options. A command used incorrectly (wrong syntax or case) will prompt a display of the correct usage.

->help

Commands Available to the User:

Built in Commands:

arpbridge

netstat ping

showtraceroute

soft_reset

telnet

imux

ds1alarm

dsx1

dsx3

defroute reset

link_trap wanpq

SPECIAL:

done, quit, or exit - Exit from the Network Tools.

For help with a specific command, type 'help <command>'.

->

090829

Figure 4-2 Network Tools Help Screen

4-4

HSIM-W87 User’s Guide

Image 30
Contents HSIM-W87 Page HSIM-W87 User’s Guide Industry Canada Notice Cabletron Software Program License HSIM-W87 User’s Guide Contents Contents Using this Manual Chapter IntroductionImportant Notice Overview Imux Features Data Flow in the HSIM-W87Connectivity Hdlc Inverse Multiplexing Imux5 DS1 Alarm Priority QueuingSnmp and MIB Support Lanview Diagnostic LEDs Document ConventionsRelated Documentation Bold typeGetting Help Your email addressHSIM-W87 User’s Guide Chapter Installation Unpacking the HSIM-W87Installing the HSIM-W87 Installing the HSIM-W87 in an Interface ModuleInstalling the HSIM-W87 Installing the HSIM-W87 Installing the HSIM-W87 in a Standalone Device Connecting the HSIM-W87 to the Network HSIM-W87 SetupChapter Lanview LedsLanview LEDs Chapter Management Local ManagementManagement Network Tools Commands HelpCommand Built-in Commands ImuxExample Imux 1 -ac 1Command wanpq WanpqCommand ds1alarm Syntax ds1alarm Ds1alarmCommand dsx1 Command dsx3 Dsx1Dsx3 Description Special CommandsSyntax OptionsSample Imux Configuration Imux 1 -ac 1Sample Imux Configuration Enabling the Imux Application Chapter Troubleshooting Troubleshooting the HSIM-W87Hardware Troubleshooting Status STS LED is OFF Investigating Software Configuration Problems Problems with the Firmware ImageHSIM-W87 User’s Guide Appendix a Specifications Physical PropertiesEnvironmental Requirements Regulatory Compliance Appendix B Typical Configuration Appendix B Typical Configuration Appendix C WAN Terms and Acronyms Appendix C WAN Terms and Acronyms WAN Terms and Acronyms HSIM-W87 User’s Guide WAN Terms and Acronyms HSIM-W87 User’s Guide