Cabletron Systems HSIM-W87 manual Command wanpq, Wanpq

Chapter 4: Management

command: wanpq

Syntax: wanpq wanpq -ea wanpq -da

wanpq -aip <IPADDRESS> wanpq -dip <IPADDRESS>

Description: WAN IP Priority Queuing is used to prioritize IP packets from a specified IP address. <IPADDRESS> - The Internet Protocol (IP) address being added to or removed from the Wide Area Network Priority Queue database.

Options: wanpq (with no options) displays information on the status of the WAN priority queue.

-ea enables the WAN Priority Queue Application. -da disables the WAN Priority Queue Application.

-aip <IPADDRESS> Adds the IP address designated by IPADDRESS to the WAN Priority Queue database.

-dip <IPADDRESS> Deletes the IP address designated by IPADDRESS from the WAN Priority Queue database.

Example:

->wanpq

#

#WAN Priority Queue Status: Disabled

#

#Maximum number of address entries: 16

#

#Current number of address entries programmed: 0

#

->wanpq -ea

#

#WAN Priority Queue Application enabled. ->

2689_1

4-8 HSIM-W87 User’s Guide