Network Tools
Options: imux <IMUXID> (with no options) displays status information.
-ea enables the Inverse Multiplexer Application designated by IMUXID.
-da disables the Inverse Multiplexer Application designated by IMUXID.
-eg <GROUPID> enables the Inverse Multiplexer group designated by GROUPID.
-dg <GROUPID> disables the Inverse Multiplexer group designated by GROUPID.
-ac <GROUPID> <INTERFACENUM> Adds the WAN channel designated by INTERFACENUM to the Inverse Multiplexer group designated by GROUPID.
-dc <GROUPID> <INTERFACENUM> Deletes the WAN channel designated by INTERFACENUM from the Inverse Multiplexer group designated by GROUPID.
Example:
->imux 1 -ac 1 29
#Inverse Multiplexer channel with ifIndex 29 added to group 1 -> imux 1
#
#WAN Inverse Multiplexer 1 Status: Disabled
# | | Inverse | | WAN | Available | Xmit Byte | | Inverse | |
# Multiplexer | Group | Physical | BW | Count | Multiplexer | Channel |
# | ID | Admin | Status | Number | (bits/sec) | (bytes) | ID | IfIndex | Status |
# | ------------------------------------------------------------------------------------------------------------- | | | | | | | |
# | 1 | Disabled | 22 | 1536000 | 0 | 1 | 29 | INACTIVE |
# | | | | | | | | | |
# | | | | | | | | | |
#Number of WAN Inverse Multiplexer Groups currently programmed : 1
#Number of WAN Inverse Multiplexer Channels currently programmed : 1
imuxsetup1