Cabletron Systems 42T TPIM-F3, TPIM-F2 Specifications, Parameter Typical Worst Case Value Budget

REQUIREMENTS/SPECIFICATIONS

	Table 2-8.	.
		TPIM-F2 Specifications.
Parameter	Typical		Worst Case	Worst Case	Typical
	Value			Budget	Budget
Receive	-30.5 dBm		-28.0 dBm	—	—
Sensitivity
Peak Input	-7.6 dBm		-8.2 dBm	—	—
Power
Transmitter Power:
50/125 ∝m	-13.0 dBm		-15.0 dBm	13.0 dB	17.5 dB
62.5/125 ∝m	-10.0 dBm		-12.0 dBm	16.0 dB	20.5 dB
100/140 ∝m	-7.0 dBm		-9.0 dBm	19.0 dB	23.5 dB

Error Rate: Better than 10-10

TPIM-F3

TPIM-F3, shown in Figure 2-7, is an ST connector that supports Single Mode fiber Optic cabling.

		RX	TX	LNK
				TPIM-F3
	Figure 2-7. The TPIM-F3
	Table 2-9. TPIM-F3 Specifications
Parameter		Typical		Minimum	Maximum
Transmitter		1300 nm		1270 nm	1330 nm
Peak Wave Length
Spectral Width		60 nm		–	100 nm
Rise Time		3.0 nsec		2.7 nsec	5.0 nsec

2-13