Cabletron Systems 42T Trap Destination, Trap Community Name, Enable Traps, Setting Snmp Traps

		LOCAL MANAGEMENT
uMMAC-T Local Management		Flash Image Version: 01.00.01
	SNMP TRAPS
Trap Destination	Trap Community Name	Enable Traps
xxx.xxx.xxx.xxx	public	[YES]
xxx.xxx.xxx.xxx	public	[YES]
xxx.xxx.xxx.xxx	public	[YES]
xxx.xxx.xxx.xxx	public	[YES]
xxx.xxx.xxx.xxx	public	[NO]
xxx.xxx.xxx.xxx	public	[NO]
xxx.xxx.xxx.xxx	public	[NO]
xxx.xxx.xxx.xxx	public	[NO]
SAVE		RETURN

Figure 4-7. SNMP TRAPS Screen

The following sections discuss the fields on the SNMP TRAPS Screen and provide instructions for using them.

Trap Destination

This field shows the IP Address of the workstation that receives traps from the MicroMMAC-T.

Trap Community Name

This field displays the user-defined name of the SNMP Compliant Network Management Stations that receive traps.

Enable Traps

This field lets you enable the transmission of SNMP trap messages.

Setting SNMP Traps

1.Highlight the Trap Destination field.

2.Enter the IP address of the station you want to receive traps from the MicroMMAC-T. The format for this entry is XXX.XXX.XXX.XXX, with the value of XXX ranging from 0 to 255.

4-17