Cabletron Systems MICROMMAC-22T, 42T manual Static System Messages, Displayed Message Significance

TROUBLESHOOTING

5.2.1 Static System Messages

Static System messages (Table 5-2) display MicroMMAC-T configuration information. To view them, press and release the Display button (Figure 5-1). Press the Display button to scroll through each message. If the Display button is not pressed again within ten seconds, the display defaults back to the product name.

Table 5-2. Static System Messages

Displayed Message	Significance
IP Address	Displays current IP address. This can be changed via
xxx.xxx.xxx.xxx	Local Management
MAC Address	Displays Hardware or MAC address
xx.xx.xx.xx.xx.xx
RAM Image	Displays currently executing image
Rev. xx.xx.xx
Boot PROM	Displays internal Boot PROM version number
Rev. xx.xx.xx
Flash Programmed	Displays number of times Flash EEPROM has been
xx Times	programmed.
COM 1	Displays COM 1 Port’s current Baud rate
Baud Rate xxxxxx
COM 1	Displays COM 1 Port’s current function (Local
Function xxxxxx	Management console, UPS, or SLIP)
COM 2	Displays COM 2 Port’s current Baud rate
Baud Rate xxxxxx
COM 2	Displays COM 1 Port’s current function
Function xxxxxx

5-3