Cabletron Systems MICROMMAC-22T, 42T manual Ring Security Screen

LOCAL MANAGEMENT

3.Press the Return key.

If the format is invalid, the “INVALID IP FORMAT” message appears. Re-type the Trap Destination IP address using the correct format.

4.Highlight the Trap Community Name field.

5.Enter the community name of the device to receive traps and then press the Return key.

If you press the Return key without entering a community name, the field defaults to <CR>.

6.Highlight the Enable Traps field.

7.Enter Y (yes) to send traps from the MicroMMAC-T to the destination workstation, or N (no) to prevent traps from being sent.

8.Highlight the SAVE command and then press the Return key.

The “SAVED” message appears indicating that your changes have been saved to memory.

4.3.5 The RING SECURITY Screen

The MicroMMAC-T acts as the Ring Security Monitor for the entire ring. Users who have Super-User privileges can control access to the Token Ring network through the RING SECURITY screen (Figure 4-8). When Ring Security is enabled, the MicroMMAC-T stores in a secure database in NVRAM an allowed stations list consisting of the MAC addresses of up to 255 stations on the network.

4-18