Cabletron Systems 42T, MICROMMAC-22T manual Device Statistics Screen

LOCAL MANAGEMENT

4.3.6 The DEVICE STATISTICS Screen

The DEVICE STATISTICS screen (Figure 4-9) displays ring information, isolating errors, and non-isolating errors.

uMMAC-T Local Management			Flash Image Version: 01.00.01
		DEVICE STATISTICS (TOTAL)
			RING INFORMATION
Frames Received:		4572	Active Monitor Addr:		00-00-B8-28-08-54
KBytes Received:		10157	Ring Status: Normal
Errors Received:		0	Ring	Number:	0
Beacon	States:	0	Stations on Ring:		1
Ring	Purges:	2	Ports Enabled:		0
Active Monitor Changes:		1	Ring Speed	(Mb/s):	4
ISOLATING	ERRORS		NON-ISOLATING	ERRORS
Line	Errors:	0	Lost Frame	Errors:	0
Burst	Errors:	0	Frame Copied	Errors:	0
AC	Errors:	0	Rcvr Congestion	Errors:	0
Abort Transmit	Errors:	0	Token	Errors:	0
Internal	Errors:	0	Frequency	Errors:	0
	[ TOTAL ]			[ REFRESH 3sec ]		RETURN

Figure 4-9. DEVICE STATISTICS Screen

The following sections discuss the fields on the DEVICE STATISTICS screen and provide instructions for using them.

DEVICE STATISTICS

The DEVICE STATISTICS counter mode field at the top of the screen (Figure 4-9 shows an sample screen in the TOTAL counter mode) displays the method used for compiling device statistics. The method is selected from the corresponding counter mode field located at the bottom of the screen.

The MicroMMAC-T compiles and displays statistics from three separate counter modes:

•ACCUMULATE: This mode lets you initiate a new statistic count for a specified time period (procedure described below).

•DELTA: This mode automatically displays statistics describing network performance since the last screen refresh (3 to10 seconds).

4-23