Extron electronic IPL T CR48 Installation and Operation, cont’d, Furniture or projector mounting

Page 16

Installation and Operation, cont’d

Furniture or projector mounting

In addition to using the IPL T CR48 unit on a rack, it can also be furniture or projector mounted. Furniture mount or projector mount the interface using the optional mounting kit (Extron part #70-212-01, furniture, or Extron part #70-217-01, projector) as follows:

1. Attach the mounting brackets to the interface with the machine screws provided (figure 2-3).

2. If feet were previously installed on the bottom of the interface, remove them.

3. For furniture mounting, hold the interface with the attached brackets against the underside of the table or other furniture. Mark the location of the screw holes of the bracket on the mounting surface.

4. For furniture mounting, drill 3/32” (2 mm) diameter pilot holes, 1/4” (6.3 mm) deep in the mounting surface at the marked screw locations.

5. For furniture mounting, insert #8 wood screws into the four pilot holes. Tighten each screw into the mounting surface until just less than 1/4” of the screw head protrudes.

6. For furniture mounting, align the mounting screws with the slots in the brackets and place the interface against the surface, with the screws through the bracket slots.

7. For furniture mounting, slide the unit slightly forward or back, then tighten all four screws to secure it in place.

8. For projector mounting, secure the interface to a projector mount or other surface by inserting the mounting bolt through the bracket’s slotted hole.

Projector

Lift

Control

Mounting

Bolt

Projector

Projector Mount

IPLT

CR48

R

1INPUT

 

 

3

3RELAY

 

2

 

1

 

 

4

5

 

2

7

 

 

4

100

 

6

 

8

LINK

 

 

ACT

Furniture Mount

Projector

Mounting

Bracket

Figure 2-3 — Furniture and projector mounting for the IPL T CR48

2-4 IPL T CR48 • Installation and Operation

Page 15 Page 17
Image 16
Page 15 Page 17
Contents IPL T CR48 IP Link ToolsPrecautions Safety Instructions English安全须知 中文 FCC Class a NoticeThis page has been intentionally left blank Quick Start Guide IPL T CR48 IPL T CR48 Quick Start Guide QS-1Quick Start Guide -­ IPL T CR48, cont’d QS-2 IPL T CR48 Quick Start GuideTable of Contents Table of Contents, cont’d One Features IntroductionAbout this Manual About the IPL T CR48 InterfaceEasily configured and controlled Introduction, cont’d Two Installation and Operation Installation OverviewIPL T CR48 Installation and Operation Mounting the IPL T CR481U Rack Shelf Installation and Operation, cont’d Furniture or projector mountingRear Panel Features and Cabling IPL T CR48 interface back panel PowerConnections Ethernet/LANIdentification Example application using input and relay ports OperationFront panel indicators Resetting the unitIPL T CR48 Installation and Operation Installation and Operation, cont’d Three Connection and Configuration Connecting the HardwareIPL T CR48 Connection and Configuration Ethernet connectionIPL T CR48 Connection and Configuration Relay connectionsConnection and Configuration, cont’d Configuring the HardwarePC configuration IPL T CR48 interface configurationConfiguring the IPL T CR48 using the ARP command Executing the ARP command Configuring the IPL T CR48 using direct PC connection 255.255.0.0Firmware upgrades Four Communication and Control Ports OverviewContact closure input ports Relay portsAccessing and using the Web server Logon and system status Communication with the InterfaceWeb server IPL T CR48 Communication and ControlEstablishing or changing system or port settings Communication and Control, cont’dWeb server port settings screen Setting and changing your passwordsWeb server passwords screen Editing and adding e-mail alertsEmail alerts screen Sending an e-mail alert through TelnetUpgrading the firmware Managing filesWeb server File Management screen Using the command/response table 10- ASCII-to-HEX conversion table Symbol definitionsCommunication and Control = NvramCopyright information Copyright 2003, Extron Electronics IPL T CR48Password information Error responsesInput Contact Closure port Relay functionsFirmware Version/Part Number/Information IP Setup Commandsz IPL T CR48Control Command Ascii Telnet URL Encoded Web ResponseIPL T CR48 Communication EDH ECA File Commands Re-map port designationsWeb Browser Specific MailECM Event ControlReset ZAP/Erase Commands EAEAccessing and using Telnet Communication and Control, cont’d Device ControlCustom Web pages Telnet portTroubleshooting Power connectionsConfiguration Data connectionsAAppendix a Specifications, Part Numbers, Accessories SpecificationsIPL T CR48 Specifications, Part Numbers, and Accessories CE, CUL, ULAccessories Included parts Replacement Part numberAccessories Part number Included partsAppendixBB Glossary GlossaryIPL T CR48 Glossary IPL T CR48 Glossary Glossary, cont’d Extron’s Warranty USA, Canada, South America Japan Central AmericaExtron Electronics. All rights reserved
Related manuals
Manual 46 pages 9.65 Kb

IPL T CR48 specifications

The Extron IPL T CR48 is a cutting-edge technology solution designed for modern audiovisual environments. As a compact, high-performance control processor, it is specifically tailored for managing and automating AV systems in various settings, including classrooms, conference rooms, and other collaborative spaces. The IPL T CR48 seamlessly integrates with a wide range of Extron products and third-party devices, making it a versatile choice for any AV installation.

One of the main features of the IPL T CR48 is its powerful control capabilities. It supports up to 48 programmable control ports, which allow users to manage multiple displays, projectors, and other audiovisual equipment effortlessly. This extensive control range ensures that every device in the AV system is easily operable from a single interface, streamlining the user experience.

In addition to its impressive control capabilities, the IPL T CR48 integrates advanced IPLink technology. This unique feature allows for remote control and monitoring of AV systems over an IP network, offering system administrators the flexibility to manage equipment from virtually anywhere. This capability is particularly valuable in large installations, where managing multiple systems simultaneously can be complex and time-consuming.

The IPL T CR48 also boasts a user-friendly interface, thanks to its compatibility with Extron's GlobalViewer Enterprise software. This robust software provides users with a web-based platform for real-time monitoring and management of their AV systems. It enables users to configure, schedule, and control their AV devices, ensuring a smooth operation throughout all events and presentations.

Moreover, the IPL T CR48 is engineered with enhanced security features, including customizable user access levels, ensuring that only authorized personnel can control sensitive equipment. This aspect is crucial for educational and corporate environments, where security and privacy are paramount.

Compact and reliable, the IPL T CR48 excels in both functionality and performance. Its durable design and advanced technologies make it a preferred choice among AV professionals looking to improve the efficiency of their installations. Overall, the Extron IPL T CR48 represents a significant advancement in control processing technology, providing a comprehensive solution for diverse audiovisual applications today.
Top Page Image Contents