Extron electronic manual Configuring the IPL T CR48 using direct PC connection, 255.255.0.0

Page 29

Configuring the IPL T CR48 using direct PC connection

This type of connection is used initially to connect to and configure the IPL T CR48 unit. The unit’s default settings (IP address, subnet mask, and (optional) administrator name and password) must be changed in order to use the unit on an intranet (LAN) or on the Internet (WAN).

1.Plug one end of a CAT 5, crossover Ethernet cable into the rear panel Ethernet connector on the IPL T CR48 unit. Refer to figure 2-6 for RJ-45 connector wiring.

2.Plug the other end of the Ethernet cable into the Ethernet port on your PC.

3.Right click the Network Neighborhood or My Network Places icon on your Windows (98, 2000, NT®, ME, XP) desktop and select Properties from the menu.

4.Select Internet Protocol (TCP/IP) from the list then select Properties. (If you are using Windows 2000, right-click Local Area Connection and select Properties from the menu, then select Internet Protocol (TCP/IP) from the list and select Properties again.) If Internet Protocol (TCP/ IP) is not on the list, it must be added (installed). Refer to your Windows user’s manual or the online Help system for information on how to install the TCP/IP protocol.

5.Write down your current IP address and Subnet Mask below. If your PC is set to “Obtain an IP address automatically,” make a note of that, instead.

IP Address:

. . .

Subnet Mask:

. . .

6.Click “Specify an IP address” or “Use the following IP address” (depending on your operating system), and leave the default gateway blank. Enter the following values:

IP address:

192.168.254.253

Subnet mask:

255.255.0.0

7.Save the changes and exit the Network setup. Reboot the PC, if required, for the changes to become effective.

8.Launch your Web browser (Netscape Navigator or Internet Explorer), and type “http://192.168.254.254/ index.html” in the browser’s Address field. The IPL T CR48 default Web page is displayed. Refer to “IPL T CR48 configuration,” in this chapter, for information on configuring your unit.

IPL T CR48 • Connection and Configuration

3-7

Page 28 Page 30
Image 29
Page 28 Page 30
Contents IP Link Tools IPL T CR48Safety Instructions English PrecautionsFCC Class a Notice 安全须知 中文This page has been intentionally left blank IPL T CR48 Quick Start Guide QS-1 Quick Start Guide IPL T CR48QS-2 IPL T CR48 Quick Start Guide Quick Start Guide -­ IPL T CR48, cont’dTable of Contents Table of Contents, cont’d One Introduction FeaturesAbout this Manual About the IPL T CR48 InterfaceEasily configured and controlled Introduction, cont’d Two Installation Overview Installation and OperationIPL T CR48 Installation and Operation Mounting the IPL T CR481U Rack Shelf Furniture or projector mounting Installation and Operation, cont’dIPL T CR48 interface back panel Power Rear Panel Features and CablingIdentification Ethernet/LANConnections Operation Example application using input and relay portsResetting the unit Front panel indicatorsIPL T CR48 Installation and Operation Installation and Operation, cont’d Three Connecting the Hardware Connection and ConfigurationIPL T CR48 Connection and Configuration Ethernet connectionRelay connections IPL T CR48 Connection and ConfigurationConfiguring the Hardware Connection and Configuration, cont’dPC configuration IPL T CR48 interface configurationConfiguring the IPL T CR48 using the ARP command Executing the ARP command 255.255.0.0 Configuring the IPL T CR48 using direct PC connectionFirmware upgrades Four Ports Overview Communication and ControlContact closure input ports Relay portsCommunication with the Interface Accessing and using the Web server Logon and system statusWeb server IPL T CR48 Communication and ControlCommunication and Control, cont’d Establishing or changing system or port settingsSetting and changing your passwords Web server port settings screenEditing and adding e-mail alerts Web server passwords screenSending an e-mail alert through Telnet Email alerts screenManaging files Upgrading the firmwareWeb server File Management screen Using the command/response table Symbol definitions 10- ASCII-to-HEX conversion table= Nvram Communication and ControlCopyright 2003, Extron Electronics IPL T CR48 Copyright informationError responses Password informationFirmware Version/Part Number/Information Relay functionsInput Contact Closure port IPL T CR48 IP Setup CommandszIPL T CR48 Communication Command Ascii Telnet URL Encoded Web ResponseControl EDH ECA Re-map port designations File CommandsMail Web Browser SpecificEvent Control ECMEAE Reset ZAP/Erase CommandsCommunication and Control, cont’d Device Control Accessing and using TelnetCustom Web pages Telnet portPower connections TroubleshootingData connections ConfigurationAAppendix a Specifications Specifications, Part Numbers, AccessoriesCE, CUL, UL IPL T CR48 Specifications, Part Numbers, and AccessoriesIncluded parts Replacement Part number AccessoriesAccessories Part number Included partsAppendixBB IPL T CR48 Glossary GlossaryGlossary IPL T CR48 Glossary Glossary, cont’d USA, Canada, South America Japan Central America Extron’s WarrantyExtron Electronics. All rights reserved
Related manuals
Manual 46 pages 9.65 Kb

IPL T CR48 specifications

The Extron IPL T CR48 is a cutting-edge technology solution designed for modern audiovisual environments. As a compact, high-performance control processor, it is specifically tailored for managing and automating AV systems in various settings, including classrooms, conference rooms, and other collaborative spaces. The IPL T CR48 seamlessly integrates with a wide range of Extron products and third-party devices, making it a versatile choice for any AV installation.

One of the main features of the IPL T CR48 is its powerful control capabilities. It supports up to 48 programmable control ports, which allow users to manage multiple displays, projectors, and other audiovisual equipment effortlessly. This extensive control range ensures that every device in the AV system is easily operable from a single interface, streamlining the user experience.

In addition to its impressive control capabilities, the IPL T CR48 integrates advanced IPLink technology. This unique feature allows for remote control and monitoring of AV systems over an IP network, offering system administrators the flexibility to manage equipment from virtually anywhere. This capability is particularly valuable in large installations, where managing multiple systems simultaneously can be complex and time-consuming.

The IPL T CR48 also boasts a user-friendly interface, thanks to its compatibility with Extron's GlobalViewer Enterprise software. This robust software provides users with a web-based platform for real-time monitoring and management of their AV systems. It enables users to configure, schedule, and control their AV devices, ensuring a smooth operation throughout all events and presentations.

Moreover, the IPL T CR48 is engineered with enhanced security features, including customizable user access levels, ensuring that only authorized personnel can control sensitive equipment. This aspect is crucial for educational and corporate environments, where security and privacy are paramount.

Compact and reliable, the IPL T CR48 excels in both functionality and performance. Its durable design and advanced technologies make it a preferred choice among AV professionals looking to improve the efficiency of their installations. Overall, the Extron IPL T CR48 represents a significant advancement in control processing technology, providing a comprehensive solution for diverse audiovisual applications today.
Top Page Image Contents