Extron electronic IPL T CR48 manual Installation Operation, Installation Overview

Page 9

Installation and

Operation

This section describes the installation and the operation of the IPL T CR48. Topics that are covered include:

zzInstallation Overview zz Mounting the IPL T CR48

zz Rear Panel Features and Cabling zz Operation

Installation Overview

To install and set up the IPL T CR48, follow these steps:

1.Turn all of the equipment off. Make sure that the input devices (such as motion detectors and alarms), the IPL T CR48, and the output devices (such as projectors or screen lifts) are all turned off and disconnected from the power source.

2.Mount the IPL T CR48 unit (see Mounting the IPL T CR48).

3.Attach the cables (see Connecting the Hardware in the “Connection and Configuration” section.

4.Connect power cords and turn on the devices in the following order: output devices (projector lifts, screen lifts, lighting system, and so on), IPL T CR48, serial controller or computer (PC), then input devices (DSS, cable boxes, and so on).

5.Configure the IPL T CR48 through Telnet, then access the unit using an Internet browser.

Mounting the IPL T CR48

Optional rack shelves and an assortment of mounting kits (furniture and projector mount) are available for use with the IPL T CR48 controller. See the Specifications and Part Numbers section for the part numbers of these accessories. Read the instructions provided with the rack shelf or mounting kit for installation procedures.

The IPL T CR48 includes rubber feet so that it can be set on a table. If you are going to mount the unit to a rack shelf, furniture, or pole, and these feet were attached to the controller, remove the feet before mounting.

IPL T CR48 • Installation and Operation

3

Page 8 Page 10
Image 9
Page 8 Page 10
Contents IPL T CR48 Precaucion AchtungAvertissement VorsichtCopyright Page Contents IPL T CR48 Contents Introduction FeaturesAbout this Guide About the IPL T CR48Easily configured and controlled Installation Operation Installation OverviewMounting the IPL T CR48 Rack Mounting UL Guidelines for Rack MountingFurniture or Projector Mounting Rear Panel Features and CablingPower Connector Wiring PowerEthernet/LAN OperationConnections IndentificationResetting the Controller Front Panel IndicatorsMode Activation Result Purpose and Notes IPL T CR48 Reset Mode SummaryUse EventsConnecting the Hardware Connection ConfigurationEthernet Connection ExtronPC Configuration Configuring the HardwareContact Closure Input and Relay Connections Contact closure input connectionsIPL T CR48 Interface Configuration Configuring the IPL T CR48 using the ARP commandInitial start up Executing the ARP Command Configuring the IPL T CR48 using direct PC connection Firmware upgradesSelect Internet Protocol TCP/IP from the list Communication Control Ports OverviewContact Closure Input Ports Communication with the Interface Relay PortsWeb Server Enter Network Password Dialog Box Accessing and using the Web serverSetting and changing your passwords Establishing or changing system or port settingsSubmit Passwords ScreenEmail Alerts screen Editing and adding e-mail alertsUpgrading the firmware Firmware Upgrade ScreenFile Management Screen Managing filesProgrammer’s Guide for the Telnet and Web Browser Using the Command/Response TableASCII-to-HEX Conversion Table Symbol definitionsCopyright information Password informationURL Encoding Error responsesUnsafe characters Reserved charactersRelay Functions Command Ascii Telnet URL Encoded Web ResponseInput Contact Closure Port Firmware Version/Part Number/InformationIPL T CR48 Communication IP Setup CommandsRe-map Port Designations File CommandsWeb Browser Specific MailEvent Control Reset Zap/Erase Commands Device Control Accessing and using TelnetCustom Web Pages Telnet PortPower Connections TroubleshootingConfiguration Data ConnectionsSpecifications Specifications Part NumbersIncluded Parts Replacement Part Number AccessoriesAccessories Part Number Part NumbersGlossary IPL T CR48 Glossary Europe, Africa, and the Middle China East USA, Canada, South America Japan Central AmericaAsia Middle East EuropeExtron Middle East
Related manuals
Manual 66 pages 29.57 Kb

IPL T CR48 specifications

The Extron IPL T CR48 is a cutting-edge technology solution designed for modern audiovisual environments. As a compact, high-performance control processor, it is specifically tailored for managing and automating AV systems in various settings, including classrooms, conference rooms, and other collaborative spaces. The IPL T CR48 seamlessly integrates with a wide range of Extron products and third-party devices, making it a versatile choice for any AV installation.

One of the main features of the IPL T CR48 is its powerful control capabilities. It supports up to 48 programmable control ports, which allow users to manage multiple displays, projectors, and other audiovisual equipment effortlessly. This extensive control range ensures that every device in the AV system is easily operable from a single interface, streamlining the user experience.

In addition to its impressive control capabilities, the IPL T CR48 integrates advanced IPLink technology. This unique feature allows for remote control and monitoring of AV systems over an IP network, offering system administrators the flexibility to manage equipment from virtually anywhere. This capability is particularly valuable in large installations, where managing multiple systems simultaneously can be complex and time-consuming.

The IPL T CR48 also boasts a user-friendly interface, thanks to its compatibility with Extron's GlobalViewer Enterprise software. This robust software provides users with a web-based platform for real-time monitoring and management of their AV systems. It enables users to configure, schedule, and control their AV devices, ensuring a smooth operation throughout all events and presentations.

Moreover, the IPL T CR48 is engineered with enhanced security features, including customizable user access levels, ensuring that only authorized personnel can control sensitive equipment. This aspect is crucial for educational and corporate environments, where security and privacy are paramount.

Compact and reliable, the IPL T CR48 excels in both functionality and performance. Its durable design and advanced technologies make it a preferred choice among AV professionals looking to improve the efficiency of their installations. Overall, the Extron IPL T CR48 represents a significant advancement in control processing technology, providing a comprehensive solution for diverse audiovisual applications today.
Top Page Image Contents