Extron electronic MVX VGA A manual Example 2 Adding a tie to a set of video and audio ties

Example 2: Adding a tie to a set of video and audio ties

In the following example, a new video tie is added to the current configuration. The steps show the front panel indications that result from your action.

NThis example assumes that you have performed example 1.

1. Press and release the Esc button (figure 3-9).

Press the Esc button to clear all selections.

CONTROL

1

ENTER PRESET VIEW ESC

1= LED blinks once. The LED blinks once.

Figure 3-9 — Clear all selections

2. To select video only for the tie, if necessary, press and release the RGBHV button and/or Audio button (figure 3-10).

I/O

RGBHV AUDIO

Press the RGBHV button to toggle on and off. Press the Audio button to toggle on and off.

The LED lights when selected. The LED is unlit when deselected.

Figure 3-10 — Select RGBHV only

		3.	Press and release the Input 5 button (figure 3-11).
Press and release the Input 5 button.
The LED lights.
			INPUTS			The Output 3, Output 4, and Output 8 LEDs light to indicate
3	4	5	6			the RGBHV ties created in example 1.
					1	2	3	4	5	6	7	8
								OUTPUTS
		Figure 3-11 — Select an input
		4.	Press and release the Output 1 button (figure 3-12).
			Press and release the Output 1 button.
			The LED blinks to indicate that the selected
			RGBHV input will be tied to this output.
									ENTER PRESE
			1	2	3	4	5	6	The Enter LED blinks to indicate
									the need to confirm the change.
						OUTPUTS
		Figure 3-12 — Select the output
						MVX VGA A Matrix Switchers • Operation						3-11

PRELIMINARY