Extron electronic MVX VGA A manual Creating a tie, Deselect video and/or audio as desired

Quick Start —

MVX VGA A Matrix Switchers, continued

RGBHV and Audio buttons select and deselect video and/or audio. The Audio LED blinks to indicate audio breakaway. The Audio button also selects the audio level/adjust mode. See “Viewing and adjusting the audio level” in the next column.

Creating a tie
1. Press and release the Esc	Press the Esc button
button to clear any input	to clear all selections.
LEDs, output LEDs, or
control LEDs that may be
lit.
2. Press and release the	ESC
RGBHV and/or Audio	The LED blinks once.
I/O button(s) to select or

Save a	Press and hold.
preset	2 seconds
PRESET		Preset LED blinks. PRESET
Recall a	Press and release.
preset
PRESET		Preset LED lights. PRESET

All input and output buttons with assigned presets light.

The configuration data at assigned preset locations will be overwritten.

1 2 3 4

deselect video and/or audio as desired.
Lit when selected.		I/O	Lit when selected.
Off when deselected.			Off when deselected.
	RGBHV AUDIO

2. Press	1
and
release
the
desired

input or output button.

The LED blinks to indicate that this preset is selected.

The Enter LED

blinks to indicate

the need to save or

ENTER recall the preset.

PRELIMINARY

3. Press and release the	The input LED	5
desired input button.	lights to indicate
4. Press and release the	the selection.
desired output button(s).

Output LEDs blink to indicate a potential tie.

3 4 8 ENTER

Enter LED blinks to indicate the need to confirm the change.

5. Press and release the Enter button. All input and output LEDs and the Enter LED go out.

Saving or recalling a preset

1. Save a preset — Press and hold the Preset button for 2 seconds.

Recall a preset — Press and release the Preset button.

3. Press and release the Enter button.

Viewing and adjusting the audio level

1. Press and hold the		Audio LED blinks.
Audio button.
2. Press an input or		Hold
output button. See
		2 seconds
chapter 3 to read the
	AUDIO		AUDIO
displayed value.

5Press an input button to adjust gain/attenuation. - or -

Press an output button to adjust the output volume.

Output LEDs display gain/attenuation.

				- or -
				Input LEDs display
1	2	3	4	output volume level.

OUTPUTS

3. Increase and	button		button
decrease	decreases		increases
	the level.		the level.
the gain/
attenuation or		VIEW ESC
volume level

by pressing

the Esc (>) and View (<) buttons.

4. Press and release the Audio button to exit.

QS-2 MVX VGA A Matrix Switchers • Quick Start