Extron electronic MVX VGA A manual VX2XX2!AX2XX2

PRELIMINARY

Programmer’s Guide, cont’d

Command/response table for SIS commands (continued)

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description
Information requests
Information request	I	VX2)XX2!•AX2)XX2!]
Request part number	N	X2@]	See appendix A for part
			numbers.

NThere are two separate sets of Extron firmware on which the switcher can report: the controller firmware, which is the overall control firmware, and the latest optional Extron firmware update, which is available at www.Extron.com.

Query controller firmware			Q		X1!]
version
Example:			Q		1.23]		The factory-installed
							controller firmware version
							is 1.23 (sample value only).
Query controller firmware			0Q		X1!-X1@-X1@]		Provide a detailed status of
version (verbose)							the MVX controller firmware
							and any firmware upgrade.
							• The firmware that is
							running is marked by an
							asterisk (*).
							• A caret (^) indicates that
							the firmware has a bad
							checksum or an invalid
							load.
							• ?.?? indicates that
							firmware is not loaded.
Response description:			Controller firmware version-updated firmware version]
Example:			0q
		Description		* indicates the version running			Upload date and time
Response: n.nn-1.00(1.06-16x16 Series -Wed, 22 Feb 2006 00:00:00 GMT)-1.00*(1.06-16x16 Series							-Thu, 16 Mar 2006 16:39:21 GMT)
Meaningless
	data		MVX firmware version			Updated firmware version
for this switcher model
Request system status			S		X2#•X2#•X2#•X2#•X2#•X2$]
Response description:			+3.3V•+5V•-5V•+15V•-15V•temperature (degrees fahrenheit)]
Example:					-15V power system at -15.15V
			3.29•5.04•-5.14•15.27•-15.15•120.20
			3.3V power system	at 3.29V
					Temperature 120.20 degrees

4-12 MVX VGA A Matrix Switchers • Programmer’s Guide