Extron electronic MVX VGA A manual Viewing a configuration, Clear all selections

Viewing a configuration

The current configuration can be viewed using the front panel buttons. The View-onlymode prevents inadvertent changes to the current configuration. View-onlymode also provides a way to mute video and audio outputs (see “Muting and unmuting video and/or audio” on page 3-18).

View the current configuration as follows:

1.	Press the Esc button to clear any input LEDs, output LEDs, or control LEDs
	that are lit.
2.	Press and release the View button. All of the LEDs light for outputs that are
	not tied.
3.	Select video, audio, or both to view by pressing the RGBHV button and/or
	the Audio button.
4.	Select the desired input or output(s) whose ties you wish to view by pressing
	the input and output buttons.

N• When you enter View-onlymode, the output LEDs light for all outputs without ties. Likewise, when an output button for which there are no ties is pressed, the output LEDs turn on for all outputs without ties.

•To see all ties of the current configuration, press and release each input and output button, one at a time, with the RGBHV LED and the Audio LED lit.

•In View-only mode, you can view video and audio, video-only, or audio- only ties. Pressing and releasing the RGBHV button and the Audio button toggles each on and off.

•After 30 seconds of front panel inactivity, View-onlymode automatically deselects.

Example 4: Viewing video and audio, audio only, and video only ties

The following steps show an example of viewing the video and audio, audio-only, and video-only ties in the current configuration. The steps show the front panel indications that result from your action.

NThis example assumes that you have performed example 1, example 2, and example 3.

1. Press and release the Esc button (figure 3-21).

Press the Esc button to clear all selections.

CONTROL

1

ENTER PRESET VIEW ESC

1= LED blinks once. The LED blinks once.

Figure 3-21 — Clear all selections

2. Press and release the View button to enter View-onlymode. The View LED lights.

PRELIMINARY

MVX VGA A Matrix Switchers • Operation 3-15