Extron electronic MTPX PLUS 1616, MTPX PLUS 816 Installing and Starting the Control Program

Installing and Starting the Control Program

Another way to operate the switcher, to set the skew adjustments, the level and peaking, and the output pre-peaking (see "Optimizing the video", beginning on page 4-18), is via the Windows®-based Matrix Switchers Control Program.

This program is contained on the Extron Software Products DVD (included with the switcher). Run this program on a PC connected to a serial port (i, j, and m on pages 2-5 and

2-6), Ethernet port (k), or USB port (n) on the switcher. The program must be installed on a Windows-based computer and cannot be run from the DVD.

NFor details on operating the program, refer to the MTPX Plus User's Manual, chapter 5, “Matrix Software”.

Installing the program

NTo run this program while your computer is connected to an MTPX Plus 128 Configuration (USB) port, use version 7.7 or newer of the Matrix Switchers Control Program.

1. Insert the DVD into the drive. The Extron software DVD window should appear automatically.

NIf the window does not self-open, run Launch.exe from the DVD.

The Extron software DVD window appears.

2.	Click the Software tab.
3.	Scroll to the Matrix Switchers program and click
	Install.

MTPX Plus Series • Remote Control and Optimizing the Video 4-15

Refer also to the MTPX Plus User’s Manual at www.extron.com.