Extron electronic 325 Device List, Device Field, Device Mode, Removing a device from the network

Page 39

Device List Page

Device Field

This field identifies the video format of the devices that are present on the network:

•3G — A device that operates at all resolutions up to and including the 3G-SDI standard.

•HDSDI — A device that is operates at all resolutions up to and including the HD‑SDI standard.

•SDI — A device that operates at resolutions up to the SDI standard.

NOTE: All VNC 325 codecs are 3G.

Device Mode

The Mode column on the Device List tab shows how each VNC 325 unit is configured using the following icons:

= Encoder = Decoder = VNM Recorder = Undefined

NOTES: • The VNM Recorder is not documented in this guide. Inclusion in this list is for

reference only.

• Only devices that are or have been configured to connect to the system controller (using the procedure detailed in “Configuring Network Settings“) are listed.

• The device list may show more devices than are in your system. This is because the controller maintains a list of devices that have been used in the past and are not currently available. In this case, the IP address entry for that device is blank.

Removing a device from the network

Devices that have been physically removed from the system can be removed from this listing as follows:

1.Click the Delete icon () for the device to be removed (see figure 24). A confirmation dialog box appears.

1

2

Figure 24. Removing a Device from the Network

2.Click OK in the confirmation dialog box.

VN-Matrix 325 Serial Digital Over IP CODEC • Operation 33

Page 38 Page 40
Image 39
Page 38 Page 40
Contents VN-Matrix325 Safety Instructions English FCC Class a Notice Conventions Used in this Guide Contents VN-Matrix 325 Serial Digital Over IP Codec Contents About the VNC 325 Codec About this GuideVN-Matrix 325 Serial Digital Over IP Codec Introduction Two RS-232 serial ports FeaturesConfigurable as encoder and decoder Two levels of operator interfaceVN-Matrix 325 Serial Digital Over IP Codec Introduction Installation and Setup Overview Installation SetupVNC 325 Features Rear Panel FeaturesPlanning the System Architecture Mounting the UnitsMulticast RTP Data Transport MethodsTypical Unicast RTP Application Unicast RTPUnicast TCP Data and Control RoutingSwitched and Isolated Network Configuration Example 1 Switched and isolated network configurationApplicable Codec Configuration Selections LAN Port Example 2 Switched and isolated network configurationCodec Option LAN Port 1 RJ-45 LAN Port 2 fiber optic Routed Network Configuration Example 3 Routed Network ConfigurationConfiguring Network Settings Serial Port WiringBaud rate Data bits Parity None Stop bits Flow control None Low-level Network Configuration Controller IP option Configuration MenuConfiguration Selections Configuration SelectionsLAN Port Specific Options Function Comments Ip forwarding Not implemented. Do not change this valueMaking Remaining Connections RS-232 Over LAN PortLAN Ports RJ-45 Connector and Pinout Tables RJ-45 port wiringVideo Input, Output, and Loop Connections Encoder configurationLoop BNC connector Not used Decoder configurationStartup and Login Configure Encoders and DecodersDevice List Typical VN-Matrix 325 System Configure the Units as Encoders or DecodersConfiguring a Codec as a Source or Display Enable multicast streaming Encoder Configuration Enable multicast streamingIndications and Controls LAN-1 and LAN-2 LEDsStatus LED Network Interface Removing a device from the network Device ModeDevice List Device FieldTypical Device Page for an Encoder DeviceDevice summary panel Licensed features panelDevice setup panel Configuration panelMode Streams panel Configuration Page Video EncoderName panel Configuration Page Audio EncoderANC Audio panel Audio Encoder FEC Panel Forward error correction FEC panelAudio Encoder Streams Panel Configuration Page Colfec and Rowfec EncodersFEC Encoder Streams Panel Bandwidth Management Page and Typical Bit RatesBandwidth Management Standard Controls Panel Bandwidth management standard controls panelAdvanced Controls Panel Advanced Controls panelBandwidth Management Broadcast Contribution Video Bit Typical Embedded Audio Bit Rates in Transparent ModePeak flow rate Maximum bit ratesDecoder Video Configuration Panel Decoder Display and ConfigurationDecoder Streams Configuration Panel Decoder Streams Configuration PanelDecoder Bit Rate and Stream Decoder Bit Rate and StreamRaw Network Statistics Panel Pass-through Control Peripherals Page and Serial Port ControlConfiguring a Serial Pass-through Group Configuring a Serial Pass-through GroupFirmware Upgrade Stages Function Summary Perform on Firmware UpgradeUpgrade Uploading the upgrade to the controller codecInstalling the firmware prepare, activate, and commit stages License Passwords Panel Accounts Page Passwords and Clock ManagementController Licensing Panel Clock Management PanelAlarms AlarmsNone Filter settings panelAlarm Source Alarm Severity Description CriticalEncoder Alarm Type and Description Action Default Settings Alarm list panelAlarm types and descriptions Encoder AlarmIndicates that there is a valid Alarm Log Alarm LogsSimple Network Management Protocol Snmp Password ValueSnmp Trap Destination Values Snmp Community ValueVideo processing codec SpecificationsVideo Video input and loop through encoderControl host ports codecs, decoders Sync genlock decoderAudio input and output Audio processingGeneral Network transportOptional SFP Module Part Numbers and AccessoriesMounting and Power Options Codec Part Number and Included PartsUL Rack-Mounting Guidelines Mounting the CodecTabletop Use Mounting kitsTest Pattern Output format1280 x 720x480 Extron Warranty
Related manuals
Manual 4 pages 38.42 Kb

325 specifications

Extron Electronics has established itself as a key player in the AV technology industry, providing innovative solutions for a wide range of applications. Among their product lineup, the Extron Electronics 225 and 325 series of devices stand out for their advanced features, technologies, and characteristics that cater to both commercial and educational environments.

The Extron 225 and 325 series are designed for seamless integration into various AV systems, offering unparalleled performance and reliability. At the core of these devices is their robust signal processing capability. Both models are equipped with high-performance scalers and switchers that ensure optimal video quality. They support a wide range of resolutions, including 4K, enabling users to connect various sources without compromising image fidelity.

One of the key features of the 225 and 325 series is their versatile connectivity options. These devices come with multiple inputs, including HDMI, VGA, and composite, allowing for the integration of various AV sources. The series also includes configurable outputs, which can be customized according to the specific requirements of the installation. This flexibility is vital in multipurpose spaces where different AV setups are needed.

The technologies embedded in the 225 and 325 series also enhance usability and control. They feature Extron’s integrated control systems, which simplify the operation of entire AV systems. Users benefit from the intuitive user interface, enabling easy switching and management of devices. Additionally, compatibility with third-party control systems allows for seamless integration into existing setups, streamlining operations.

Another noteworthy characteristic is the series’ built-in audio processing capabilities. Both the 225 and 325 models support various audio formats, ensuring high-quality sound output. They also include audio embedding and de-embedding functions, facilitating the integration of audio sources with video signals.

Reliability and durability are hallmarks of the Extron brand, and the 225 and 325 series are no exceptions. Designed for long-term use, these devices undergo rigorous testing to ensure they perform consistently under demanding conditions. Their compact form factor also allows for easy installation in constrained spaces, making them ideal for a variety of environments.

In summary, the Extron Electronics 225 and 325 series deliver top-tier performance, expansive connectivity, and exceptional audio-visual processing capabilities. Their innovative features and robust design make them valuable additions to any AV installation, catering to a wide range of user needs in commercial and educational settings. With Extron’s commitment to quality and user-friendly solutions, the 225 and 325 series stand as testament to their leadership in the AV technology realm.
Top Page Image Contents