Extron electronic 325 manual Simple Network Management Protocol, Snmp Password Value

Page 70

Simple Network Management Protocol

NOTE: SNMP is an internet-standard protocol for managing devices on IP network and

a component of the Internet Engineering Task Force (IETF) Internet Protocol

Suite.

It is not the intent of this guide to define SNMP further than this and this section is intended for users who are familiar with SNMP protocol.

The VN-Matrix 325 system can report alarm events via an SNMP trap, providing simple integration with network management systems (NMS).

•When communicating using SNMP, the VN-Matrix 325 system complies with the requirements of SNMP v3.

•When generating SNMP traps, the VN-Matrix 325 system complies with the requirements of SNMPv1 or SNMPv2C (user-selectable using the SNMP filter settings panel on the alarm logs page [see figure 52]).

Figure 52. SNMP Filter Settings Panel

SNMP variables that you may need to change include:

•The SNMP password

•The SNMP community value

•SNMP trap destination values

SNMP Password Value

The SNMP password is the same as the administrator password. By default this is set to admin.

You must to enter the administrator password on the accounts page before SNMP can be used. This process must be carried out for each of the following circumstances:

•When first using the system

•After a firmware upgrade to the system

A password for SNMPv3 must be exactly eight characters long.

•If the administrator password is less than eight characters in length then the remaining characters are packed as follows: “admin“ becomes “adminadm” (exclusive of the parentheses).

•If the administrator password is longer than eight characters then the value is concatenated: “concatenate“ becomes “concaten” (exclusive of the parentheses).

NOTE: These password rules apply to the SNMP management software password only and have no affect on the network interface login.

VN-Matrix 325 Serial Digital Over IP CODEC • Alarms and SNMP 64

Page 69 Page 71
Image 70
Page 69 Page 71
Contents VN-Matrix325 Safety Instructions English FCC Class a Notice Conventions Used in this Guide Contents VN-Matrix 325 Serial Digital Over IP Codec Contents About this Guide About the VNC 325 CodecVN-Matrix 325 Serial Digital Over IP Codec Introduction Two levels of operator interface FeaturesConfigurable as encoder and decoder Two RS-232 serial portsVN-Matrix 325 Serial Digital Over IP Codec Introduction Installation Setup Installation and Setup OverviewRear Panel Features VNC 325 FeaturesMounting the Units Planning the System ArchitectureData Transport Methods Multicast RTPUnicast RTP Typical Unicast RTP ApplicationData and Control Routing Unicast TCPExample 1 Switched and isolated network configuration Switched and Isolated Network ConfigurationApplicable Codec Configuration Selections Example 2 Switched and isolated network configuration LAN PortCodec Option LAN Port 1 RJ-45 LAN Port 2 fiber optic Example 3 Routed Network Configuration Routed Network ConfigurationSerial Port Wiring Configuring Network SettingsBaud rate Data bits Parity None Stop bits Flow control None Low-level Network Configuration Configuration Menu Controller IP optionConfiguration Selections Configuration SelectionsIp forwarding Not implemented. Do not change this value LAN Port Specific Options Function CommentsRS-232 Over LAN Port Making Remaining ConnectionsLAN Ports RJ-45 port wiring RJ-45 Connector and Pinout TablesEncoder configuration Video Input, Output, and Loop ConnectionsDecoder configuration Loop BNC connector Not usedConfigure Encoders and Decoders Startup and LoginDevice List Configure the Units as Encoders or Decoders Typical VN-Matrix 325 SystemConfiguring a Codec as a Source or Display Enable multicast streaming Enable multicast streaming Encoder ConfigurationLAN-1 and LAN-2 LEDs Indications and ControlsStatus LED Network Interface Device Field Device ModeDevice List Removing a device from the networkDevice Typical Device Page for an EncoderLicensed features panel Device summary panelConfiguration panel Device setup panelMode Configuration Page Video Encoder Streams panelConfiguration Page Audio Encoder Name panelANC Audio panel Forward error correction FEC panel Audio Encoder FEC PanelConfiguration Page Colfec and Rowfec Encoders Audio Encoder Streams PanelBandwidth Management Page and Typical Bit Rates FEC Encoder Streams PanelBandwidth management standard controls panel Bandwidth Management Standard Controls PanelAdvanced Controls panel Advanced Controls PanelBandwidth Management Maximum bit rates Typical Embedded Audio Bit Rates in Transparent ModePeak flow rate Broadcast Contribution Video BitDecoder Display and Configuration Decoder Video Configuration PanelDecoder Streams Configuration Panel Decoder Streams Configuration PanelDecoder Bit Rate and Stream Decoder Bit Rate and StreamRaw Network Statistics Panel Peripherals Page and Serial Port Control Pass-through ControlConfiguring a Serial Pass-through Group Configuring a Serial Pass-through GroupFirmware Upgrade Firmware Upgrade Stages Function Summary Perform onUploading the upgrade to the controller codec UpgradeInstalling the firmware prepare, activate, and commit stages License Accounts Page Passwords and Clock Management Passwords PanelClock Management Panel Controller Licensing PanelAlarms AlarmsAlarm Severity Description Critical Filter settings panelAlarm Source NoneEncoder Alarm Alarm list panelAlarm types and descriptions Encoder Alarm Type and Description Action Default SettingsIndicates that there is a valid Alarm Logs Alarm LogSnmp Password Value Simple Network Management ProtocolSnmp Community Value Snmp Trap Destination ValuesVideo input and loop through encoder SpecificationsVideo Video processing codecAudio processing Sync genlock decoderAudio input and output Control host ports codecs, decodersNetwork transport GeneralCodec Part Number and Included Parts Part Numbers and AccessoriesMounting and Power Options Optional SFP ModuleMounting kits Mounting the CodecTabletop Use UL Rack-Mounting GuidelinesOutput format Test Pattern1280 x 720x480 Extron Warranty
Related manuals
Manual 4 pages 38.42 Kb

325 specifications

Extron Electronics has established itself as a key player in the AV technology industry, providing innovative solutions for a wide range of applications. Among their product lineup, the Extron Electronics 225 and 325 series of devices stand out for their advanced features, technologies, and characteristics that cater to both commercial and educational environments.

The Extron 225 and 325 series are designed for seamless integration into various AV systems, offering unparalleled performance and reliability. At the core of these devices is their robust signal processing capability. Both models are equipped with high-performance scalers and switchers that ensure optimal video quality. They support a wide range of resolutions, including 4K, enabling users to connect various sources without compromising image fidelity.

One of the key features of the 225 and 325 series is their versatile connectivity options. These devices come with multiple inputs, including HDMI, VGA, and composite, allowing for the integration of various AV sources. The series also includes configurable outputs, which can be customized according to the specific requirements of the installation. This flexibility is vital in multipurpose spaces where different AV setups are needed.

The technologies embedded in the 225 and 325 series also enhance usability and control. They feature Extron’s integrated control systems, which simplify the operation of entire AV systems. Users benefit from the intuitive user interface, enabling easy switching and management of devices. Additionally, compatibility with third-party control systems allows for seamless integration into existing setups, streamlining operations.

Another noteworthy characteristic is the series’ built-in audio processing capabilities. Both the 225 and 325 models support various audio formats, ensuring high-quality sound output. They also include audio embedding and de-embedding functions, facilitating the integration of audio sources with video signals.

Reliability and durability are hallmarks of the Extron brand, and the 225 and 325 series are no exceptions. Designed for long-term use, these devices undergo rigorous testing to ensure they perform consistently under demanding conditions. Their compact form factor also allows for easy installation in constrained spaces, making them ideal for a variety of environments.

In summary, the Extron Electronics 225 and 325 series deliver top-tier performance, expansive connectivity, and exceptional audio-visual processing capabilities. Their innovative features and robust design make them valuable additions to any AV installation, catering to a wide range of user needs in commercial and educational settings. With Extron’s commitment to quality and user-friendly solutions, the 225 and 325 series stand as testament to their leadership in the AV technology realm.
Top Page Image Contents