Extron electronic 325 manual License

Page 62

NOTE: The remainder of the installation procedure is performed using the forward button to advance the installation through the various stages. If necessary,

the reverse button can back up a stage. The Device Upgrade Status field

indicates the current stage or the status.

The process lets you temporarily install and test the new firmware and, if it behaves satisfactorily, permanently install (commit) the new firmware. Up until the last stage, you can return to the existing firmware version.

Figure 42 summarizes the process.

3.Click the forward button (B). The Device Upgrade Status field shows PREPARE and the

percentage of progress.

This stage may last a few minutes. When it is complete, the Device Upgrade Status field shows READYTOACTIVATE.

4.Click the forward button.

The unit reboots. The VNC 325 is using the new firmware and the Device Upgrade

Status field shows READYTOCOMMIT.

5.Test the system for correct operation.

6.If everything is working correctly, click the forward button. The Device Upgrade Status

field shows Committing and the percentage of progress.

This stage may last a few minutes. When it is complete, the Device Upgrade Status field shows WAIT and the Commited Version field displays the upgrade you just successfully commited.

NOTE: If you experience any problems, click the reverse button to return to the end of the activating stage (READYTOCOMMIT display).

7.Repeat steps 1 through 6 for each codec.

License Page

Each VNC 325 codec is supplied with a feature set that is defined by its license key and structure. The key and structure are not changed as part of normal operation; this information is provided for reference only.

The system controller can be licensed to add or remove features. The license is entered when the unit is manufactured and users should not attempt modify this in any way. If you do modify these fields, the unit may become unstable.

VN-Matrix 325 Serial Digital Over IP CODEC • Operation 56

Page 61 Page 63
Image 62
Page 61 Page 63
Contents VN-Matrix325 Safety Instructions English FCC Class a Notice Conventions Used in this Guide Contents VN-Matrix 325 Serial Digital Over IP Codec Contents About this Guide About the VNC 325 CodecVN-Matrix 325 Serial Digital Over IP Codec Introduction Two levels of operator interface FeaturesConfigurable as encoder and decoder Two RS-232 serial portsVN-Matrix 325 Serial Digital Over IP Codec Introduction Installation Setup Installation and Setup OverviewRear Panel Features VNC 325 FeaturesMounting the Units Planning the System ArchitectureData Transport Methods Multicast RTPUnicast RTP Typical Unicast RTP ApplicationData and Control Routing Unicast TCPExample 1 Switched and isolated network configuration Switched and Isolated Network ConfigurationApplicable Codec Configuration Selections Example 2 Switched and isolated network configuration LAN PortCodec Option LAN Port 1 RJ-45 LAN Port 2 fiber optic Example 3 Routed Network Configuration Routed Network ConfigurationBaud rate Data bits Parity None Stop bits Flow control None Configuring Network SettingsSerial Port Wiring Low-level Network Configuration Configuration Menu Controller IP optionConfiguration Selections Configuration SelectionsIp forwarding Not implemented. Do not change this value LAN Port Specific Options Function CommentsLAN Ports Making Remaining ConnectionsRS-232 Over LAN Port RJ-45 port wiring RJ-45 Connector and Pinout TablesEncoder configuration Video Input, Output, and Loop ConnectionsDecoder configuration Loop BNC connector Not usedConfigure Encoders and Decoders Startup and LoginDevice List Configure the Units as Encoders or Decoders Typical VN-Matrix 325 SystemConfiguring a Codec as a Source or Display Enable multicast streaming Enable multicast streaming Encoder ConfigurationStatus LED Indications and ControlsLAN-1 and LAN-2 LEDs Network Interface Device Field Device ModeDevice List Removing a device from the networkDevice Typical Device Page for an EncoderLicensed features panel Device summary panelMode Device setup panelConfiguration panel Configuration Page Video Encoder Streams panelConfiguration Page Audio Encoder Name panelANC Audio panel Forward error correction FEC panel Audio Encoder FEC PanelConfiguration Page Colfec and Rowfec Encoders Audio Encoder Streams PanelBandwidth Management Page and Typical Bit Rates FEC Encoder Streams PanelBandwidth management standard controls panel Bandwidth Management Standard Controls PanelAdvanced Controls panel Advanced Controls PanelBandwidth Management Maximum bit rates Typical Embedded Audio Bit Rates in Transparent ModePeak flow rate Broadcast Contribution Video BitDecoder Display and Configuration Decoder Video Configuration PanelDecoder Streams Configuration Panel Decoder Streams Configuration PanelDecoder Bit Rate and Stream Decoder Bit Rate and StreamRaw Network Statistics Panel Peripherals Page and Serial Port Control Pass-through ControlConfiguring a Serial Pass-through Group Configuring a Serial Pass-through GroupFirmware Upgrade Firmware Upgrade Stages Function Summary Perform onUploading the upgrade to the controller codec UpgradeInstalling the firmware prepare, activate, and commit stages License Accounts Page Passwords and Clock Management Passwords PanelClock Management Panel Controller Licensing PanelAlarms AlarmsAlarm Severity Description Critical Filter settings panelAlarm Source NoneEncoder Alarm Alarm list panelAlarm types and descriptions Encoder Alarm Type and Description Action Default SettingsIndicates that there is a valid Alarm Logs Alarm LogSnmp Password Value Simple Network Management ProtocolSnmp Community Value Snmp Trap Destination ValuesVideo input and loop through encoder SpecificationsVideo Video processing codecAudio processing Sync genlock decoderAudio input and output Control host ports codecs, decodersNetwork transport GeneralCodec Part Number and Included Parts Part Numbers and AccessoriesMounting and Power Options Optional SFP ModuleMounting kits Mounting the CodecTabletop Use UL Rack-Mounting Guidelines1280 x 720x480 Test PatternOutput format Extron Warranty
Related manuals
Manual 4 pages 38.42 Kb

325 specifications

Extron Electronics has established itself as a key player in the AV technology industry, providing innovative solutions for a wide range of applications. Among their product lineup, the Extron Electronics 225 and 325 series of devices stand out for their advanced features, technologies, and characteristics that cater to both commercial and educational environments.

The Extron 225 and 325 series are designed for seamless integration into various AV systems, offering unparalleled performance and reliability. At the core of these devices is their robust signal processing capability. Both models are equipped with high-performance scalers and switchers that ensure optimal video quality. They support a wide range of resolutions, including 4K, enabling users to connect various sources without compromising image fidelity.

One of the key features of the 225 and 325 series is their versatile connectivity options. These devices come with multiple inputs, including HDMI, VGA, and composite, allowing for the integration of various AV sources. The series also includes configurable outputs, which can be customized according to the specific requirements of the installation. This flexibility is vital in multipurpose spaces where different AV setups are needed.

The technologies embedded in the 225 and 325 series also enhance usability and control. They feature Extron’s integrated control systems, which simplify the operation of entire AV systems. Users benefit from the intuitive user interface, enabling easy switching and management of devices. Additionally, compatibility with third-party control systems allows for seamless integration into existing setups, streamlining operations.

Another noteworthy characteristic is the series’ built-in audio processing capabilities. Both the 225 and 325 models support various audio formats, ensuring high-quality sound output. They also include audio embedding and de-embedding functions, facilitating the integration of audio sources with video signals.

Reliability and durability are hallmarks of the Extron brand, and the 225 and 325 series are no exceptions. Designed for long-term use, these devices undergo rigorous testing to ensure they perform consistently under demanding conditions. Their compact form factor also allows for easy installation in constrained spaces, making them ideal for a variety of environments.

In summary, the Extron Electronics 225 and 325 series deliver top-tier performance, expansive connectivity, and exceptional audio-visual processing capabilities. Their innovative features and robust design make them valuable additions to any AV installation, catering to a wide range of user needs in commercial and educational settings. With Extron’s commitment to quality and user-friendly solutions, the 225 and 325 series stand as testament to their leadership in the AV technology realm.
Top Page Image Contents