Extron electronic 325 manual Uploading the upgrade to the controller codec, Upgrade

Page 60

NOTES: � The activate and commit stages reboot the controller. This results in two

considerations:

• The upgrade file in the temporary storage area of the controller codec is

erased. Extron recommends that you:

• Prepare all devices first (the upgrade page displays the

READYTOACTIVATE message.

• Then activate the upgrade on each device (the upgrade page displays

the READYTOCOMMIT message), starting with the controller VNC 325.

If you inadvertently activate the upgrade in the controller codec before all devices are prepared, upload the file again (see below).

• There is a temporary loss of the network interface. Wait 30 seconds to allow the VNC 325 to reboot, then refresh the browser.

� Perform the activate stage on the controller codec first to ensure that the new firmware controls the upgrade of the remaining devices. Extron recommends that you activate all devices (the upgrade page displays the READYTOCOMMIT message) before committing to the controller upgrade.

Uploading the upgrade to the controller codec

Upload the file to a temporary storage area on the controller VNC 325 in accordance with the procedure below. From this location, it can be installed on all codecs in the system.

1.Login to the network interface (see “Startup and Login“ in the “Installation and Setup” section).

2.On the device list page, click anywhere on the row (except the Delete column) for the controlling VNC 325 to select that codec to receive the firmware upload (A on figure 43).

Device List Page

Device

Page

Upgrade Page

3

1

2

Figure 43. Upgrade Page

3.On the device page, click the Upgrade tab (B). The upgrade page appears (C). The page includes the following drop-down box and data fields:

•Select Firmware Version drop-down box — Selects the version to be used.

•Committed Version field — Displays the currently loaded and running version.

•Upgrade Version field — Displays the version to which you are upgrading.

•Device Upgrade Status — Reports the status of the upgrade process. At this point in the upload procedure, it reports WAIT.

VN-Matrix 325 Serial Digital Over IP CODEC • Operation 54

Page 59 Page 61
Image 60
Page 59 Page 61
Contents VN-Matrix325 Safety Instructions English FCC Class a Notice Conventions Used in this Guide Contents VN-Matrix 325 Serial Digital Over IP Codec Contents About this Guide About the VNC 325 CodecVN-Matrix 325 Serial Digital Over IP Codec Introduction Features Configurable as encoder and decoderTwo levels of operator interface Two RS-232 serial portsVN-Matrix 325 Serial Digital Over IP Codec Introduction Installation Setup Installation and Setup OverviewRear Panel Features VNC 325 FeaturesMounting the Units Planning the System ArchitectureData Transport Methods Multicast RTPUnicast RTP Typical Unicast RTP ApplicationData and Control Routing Unicast TCPExample 1 Switched and isolated network configuration Switched and Isolated Network ConfigurationApplicable Codec Configuration Selections Example 2 Switched and isolated network configuration LAN PortCodec Option LAN Port 1 RJ-45 LAN Port 2 fiber optic Example 3 Routed Network Configuration Routed Network ConfigurationConfiguring Network Settings Serial Port WiringBaud rate Data bits Parity None Stop bits Flow control None Low-level Network Configuration Configuration Menu Controller IP optionConfiguration Selections Configuration SelectionsIp forwarding Not implemented. Do not change this value LAN Port Specific Options Function CommentsMaking Remaining Connections RS-232 Over LAN PortLAN Ports RJ-45 port wiring RJ-45 Connector and Pinout TablesEncoder configuration Video Input, Output, and Loop ConnectionsDecoder configuration Loop BNC connector Not usedConfigure Encoders and Decoders Startup and LoginDevice List Configure the Units as Encoders or Decoders Typical VN-Matrix 325 SystemConfiguring a Codec as a Source or Display Enable multicast streaming Enable multicast streaming Encoder ConfigurationIndications and Controls LAN-1 and LAN-2 LEDsStatus LED Network Interface Device Mode Device ListDevice Field Removing a device from the networkDevice Typical Device Page for an EncoderLicensed features panel Device summary panelDevice setup panel Configuration panelMode Configuration Page Video Encoder Streams panelConfiguration Page Audio Encoder Name panelANC Audio panel Forward error correction FEC panel Audio Encoder FEC PanelConfiguration Page Colfec and Rowfec Encoders Audio Encoder Streams PanelBandwidth Management Page and Typical Bit Rates FEC Encoder Streams PanelBandwidth management standard controls panel Bandwidth Management Standard Controls PanelAdvanced Controls panel Advanced Controls PanelBandwidth Management Typical Embedded Audio Bit Rates in Transparent Mode Peak flow rateMaximum bit rates Broadcast Contribution Video BitDecoder Display and Configuration Decoder Video Configuration PanelDecoder Streams Configuration Panel Decoder Streams Configuration PanelDecoder Bit Rate and Stream Decoder Bit Rate and StreamRaw Network Statistics Panel Peripherals Page and Serial Port Control Pass-through ControlConfiguring a Serial Pass-through Group Configuring a Serial Pass-through GroupFirmware Upgrade Firmware Upgrade Stages Function Summary Perform onUploading the upgrade to the controller codec UpgradeInstalling the firmware prepare, activate, and commit stages License Accounts Page Passwords and Clock Management Passwords PanelClock Management Panel Controller Licensing PanelAlarms AlarmsFilter settings panel Alarm SourceAlarm Severity Description Critical NoneAlarm list panel Alarm types and descriptionsEncoder Alarm Encoder Alarm Type and Description Action Default SettingsIndicates that there is a valid Alarm Logs Alarm LogSnmp Password Value Simple Network Management ProtocolSnmp Community Value Snmp Trap Destination ValuesSpecifications VideoVideo input and loop through encoder Video processing codecSync genlock decoder Audio input and outputAudio processing Control host ports codecs, decodersNetwork transport GeneralPart Numbers and Accessories Mounting and Power OptionsCodec Part Number and Included Parts Optional SFP ModuleMounting the Codec Tabletop UseMounting kits UL Rack-Mounting GuidelinesTest Pattern Output format1280 x 720x480 Extron Warranty
Related manuals
Manual 4 pages 38.42 Kb

325 specifications

Extron Electronics has established itself as a key player in the AV technology industry, providing innovative solutions for a wide range of applications. Among their product lineup, the Extron Electronics 225 and 325 series of devices stand out for their advanced features, technologies, and characteristics that cater to both commercial and educational environments.

The Extron 225 and 325 series are designed for seamless integration into various AV systems, offering unparalleled performance and reliability. At the core of these devices is their robust signal processing capability. Both models are equipped with high-performance scalers and switchers that ensure optimal video quality. They support a wide range of resolutions, including 4K, enabling users to connect various sources without compromising image fidelity.

One of the key features of the 225 and 325 series is their versatile connectivity options. These devices come with multiple inputs, including HDMI, VGA, and composite, allowing for the integration of various AV sources. The series also includes configurable outputs, which can be customized according to the specific requirements of the installation. This flexibility is vital in multipurpose spaces where different AV setups are needed.

The technologies embedded in the 225 and 325 series also enhance usability and control. They feature Extron’s integrated control systems, which simplify the operation of entire AV systems. Users benefit from the intuitive user interface, enabling easy switching and management of devices. Additionally, compatibility with third-party control systems allows for seamless integration into existing setups, streamlining operations.

Another noteworthy characteristic is the series’ built-in audio processing capabilities. Both the 225 and 325 models support various audio formats, ensuring high-quality sound output. They also include audio embedding and de-embedding functions, facilitating the integration of audio sources with video signals.

Reliability and durability are hallmarks of the Extron brand, and the 225 and 325 series are no exceptions. Designed for long-term use, these devices undergo rigorous testing to ensure they perform consistently under demanding conditions. Their compact form factor also allows for easy installation in constrained spaces, making them ideal for a variety of environments.

In summary, the Extron Electronics 225 and 325 series deliver top-tier performance, expansive connectivity, and exceptional audio-visual processing capabilities. Their innovative features and robust design make them valuable additions to any AV installation, catering to a wide range of user needs in commercial and educational settings. With Extron’s commitment to quality and user-friendly solutions, the 225 and 325 series stand as testament to their leadership in the AV technology realm.
Top Page Image Contents