7. Starting up
7.2 Connecting the AVS 850 Power Receiver
The AVS 840 receives the AV signal from the AVS 850 Power Transmitter. The output signal is available from the AV sockets on the rear side of the unit.
Connecting:
1.Insert the cinch plug of the connecting cable into the AV socket of the Power Receiver. Make sure the colour on the plug is the same as the one on the socket.
2.Now connect the plug at the other end of the cable to the unit that is to receive the signals. Make sure that the enclosed scart plug is inserted the right way round. Use the cable labelled "In”. Do not exert force when inserting the plug!
NOTE: If you use a cinch cable for the connection (accessory), note when connecting the unit that the colour of the plug has to match the colour of the socket on the unit. If they are different, please note the following: the yellow plug
carries the video signal and must be inserted into the "video” socket, the red one goes into "audio right”, and the white one into "audio left”.
3.Set one of the channels 1 to 4 at the channel switch.
Note. If the AVS 850 Power Transmitter and the AVS 840 Power Receiver are to work together, they have to be set both at the same wireless channel.
4.Insert the mains adapter into a 230 V mains socket and the 9V plug into the socket provided. Never use any other mains adapter than this one.
5.Switch the Power Receiver on with the "On” (I) switch (the LED at the front lights up).
Place the AVS 840 Power Receiver in a favourable position, e.g. on top of the television set.,
NOTE: To control the cable tuner in the AVS 850 or the video recorder to which the AVS 850 Power Transmitter is connected, point the RC 815
30