Cables to Go AVS815 manual AVS 840 Power Receiver, Rear side, V Cinch output sockets

Page 8

5. AVS 840 Power Receiver

Items included

AVS 840 Power Receiver

Plug-in mains adapter

Cinch/scart connecting cable

Control elements

Rear side

		4
6	1	2	3
6

Items included:

1 Power AVS 840 Power Receiver

1 9 V plug-in mains adapter

1 Cinch/scart connecting cable

Control elements

1. A/V Cinch output sockets

1 video, 2 audio output sockets. These take the received signal and feed it into the receiving unit via the appropriate adapter cable. With adapter cables (2 cinch / scart cables are included with the system) it is possible to connect almost any item of equipment.

Note: for audio transmissions, it is usual to use a cinch/cinch cable. These are readily available in the trade (see picture).

2.Connecting socket for 9 V mains adapter

For connecting the 9 V mains adapter.

3.On / Off switch

For switching the video receiver on and off.

Image 8

Contents Cable Sender Power sender TV AVS815 Thank you very much Contents Safety instructions General descriptionCorrect and proper use General functionsTransmissions Control elements AVS 850 Power TransmitterItems included Channel switch TV channel selection switchMode switch On / Off switchAVS 840 Power Receiver Connecting socket for 9 V mains adapterRear side V Cinch output socketsChannel and switch settings Use as receiver without channel switchingChannel switch rear side Use as receiver with channel switchingControl elements Infra-red remote-control unit for the cable tunerGeneral Connecting the AVS 850 Power Transmitter Bringing into operationStarting up Connecting the AVS 850 Power ReceiverConnecting Page Please proceed as follows Settings on the cable tunerChanging the coding of the RC 815 remote-control unit Page Fine-tuning the TV AVS 815 Power Transmitter Operating possibilitiesExample 1 Power Transmitter to 3 Power Receivers Problem Remedy Rectifying a malfunctionPoor transmission quality No transmissionTechnical data UHF