9. Rectifying a malfunction
Problem | Remedy | |
Poor transmission quality | 1. | Reflections of the signal can sometimes affect the transmission |
|
| quality. Move the Power Transmitter or Receiver away just a few |
|
| inches and this should solve the problem. |
| 2. | Change the channel settings (1 to 4) on the Power Transmitter |
|
| and the Power Receiver. |
|
|
|
No transmission | 1. | Is the same transmission channel (1 to 4) set on the Power |
|
| Transmitter and on the Power Receiver? |
| 2. | Is the transmission distance too great? Reduce the distance |
|
| between the Power Transmitter and the Power Receiver. The |
|
| range is up to 300 metres |
|
| reduce it. |
| 3. | Have you used the right scart cable? |
|
|
|
| 1. | If you operate wireless headphones or a similar wireless |
|
| transmitter on the same frequency as the AVS 815, this can |
|
| severely reduce its range. |
| 2. | Is the RX cable inserted into the AVS 850 and glued over the |
|
| |
|
|
|
RC 815 | 1. | Wrong code set. Reset the code as described in Point 7.4. |
|
|
|
36