Cables to Go AVS815 manual Contents

Page 3

Contents

		Page
1.	Safety instructions	22
2.	General description	22
3.	Transmissions	23
4.	The AVS 850 Power Transmitter	24
5.	The AVS 840 Power Transmitter	26
6.	The RC 815 infra-red remote control for the cable tuner	28
7.	Bringing into operation	29
	7.1 Connecting the AVS 850	29
	7.2 Connecting the AVS 840	30
	7.3 Adjusting the cable tuner in the AVS 850	32
	7.4 Changing the coding of the RC 815 remote control unit	32
8.	Operating possibilities	34
9.	Rectifying a malfunction	36
10. Technical data		37

21

Image 3

Contents Cable Sender Power sender TV AVS815 Thank you very much Contents General functions Safety instructionsGeneral description Correct and proper useTransmissions AVS 850 Power Transmitter Items includedControl elements On / Off switch Channel switchTV channel selection switch Mode switchV Cinch output sockets AVS 840 Power ReceiverConnecting socket for 9 V mains adapter Rear sideUse as receiver with channel switching Channel and switch settingsUse as receiver without channel switching Channel switch rear sideInfra-red remote-control unit for the cable tuner GeneralControl elements Bringing into operation Connecting the AVS 850 Power TransmitterConnecting the AVS 850 Power Receiver ConnectingStarting up Page Settings on the cable tuner Changing the coding of the RC 815 remote-control unitPlease proceed as follows Page Operating possibilities Fine-tuning the TV AVS 815 Power TransmitterExample 1 Power Transmitter to 3 Power Receivers No transmission Problem RemedyRectifying a malfunction Poor transmission qualityUHF Technical data