Using DMM/ADMM Commands
SHOW IGMP Use the SHOW IGMP SNOOPING command to display the IGMP SNOOPING snooping information on a module. You can view the IGMP snooping
information on all of the modules installed in a CoreBuilder 5000 hub using the SHOW IGMP_SNOOPING MODULE ALL command or IGMP snooping information on a specific module using the SHOW IGMP_SNOOPING MODULE <SLOT.SUBSLOT> command.
The following command shows IGMP snooping information about the ATM Backbone SwitchModule installed in slot 4 of a CoreBuilder 5000 hub:
CB5000> show igmp_snooping module 4.1
IGMP Snooping Information
IGMP Snooping is currently ENABLED.
IGMP Snooping after Module Reboot is ENABLED.
Entry VBridge IGMP Mode
1 | 1 | ENABLED |
2 | 11 | ENABLED |