PCI-X card slots
You can install two
ECC DDR SDRAM expansion slots
Expand your system’s memory up to 8 gigabytes (GB) with
Battery
The battery provides power for the system clock.
Power supply
The
Fan array
The fan array cools the server during operation. Sensors detect and report if a fan needs service. Software adjusts the fans’ speed as necessary. A separate fan cools the
Chassis release latches
Press these latches to slide the server to its full length when in the rack, or to remove it from the cover.
Serial number label
You must use the system’s serial number when you install and set up the server software. Write down this number and keep it in a safe place. A similar label is on the back of the system, below the
Chapter 1 Xserve G5 Overview
15