Important: Memory DIMMs must be installed in pairs. You place one DIMM in each bank of slots, in a corresponding position (for example, in the empty slot closest to the center of the server in each bank for the first pair, in the slot next closest to the center for the second pair, and so on). Always start with the open slot closest to the center of the server in both banks.
DIMMs are already installed in these two slots.
If slots are available, and you want to install more memory, install additional DIMMs in this fashion: In pairs, one per bank, from the center outward.
Bank 1 | Bank 2 |
5Open the ejectors on the DIMM slot you want to use by pushing down on them.
Chapter 6 Installing or Replacing Server Components
77