Apple G5 specifications FireWire Specifications, USB Specifications, Serial Port Specifications

Page 86

86

Media, 10Base-T:Category 3 or higher UTP on 2 pairs up to 100 m

Media, 100Base-TX:Category 5 UTP on 2 pairs up to 100 m

Media, 1000Base-T:Category 5 and 6 UTP on 4 pairs up to 100 m

Channel speeds: IEEE Auto Negotiation of 10Base-T, 100Base-TX, and 1000Base-T

FireWire Specifications

Data transfer speed: 100, 200, up to 400, and up to 800 megabits per second (800 Mbps available only on back-panel FireWire ports)

FireWire 400 port (front panel) and two FireWire 800 ports (back panel)

Note: The FireWire 800 ports on your Xserve G5 system transfer data from 800 Mbps devices much faster than was possible before. These ports have 9-pin connectors, and are compatible with original FireWire devices with 6-pin or 4-pin connectors.

With an appropriate cable, the new 9-pin ports work seamlessly with all FireWire devices. Cables are available for connecting a 9-pin port to 4-pin, 6-pin, and 9-pin devices.

Cables with the three types of FireWire connectors

FireWire 400 (6-pin)

 

FireWire 400 (4-pin)

 

 

 

FireWire 800 (9-pin)

 

 

 

 

 

 

USB Specifications

Support for USB 2.0

Two external Universal Serial Bus (USB) Type A ports

Separate 480 megabit per second (Mbps) USB channel for each port

500 milliamperes (mA) at 5 V available per port for a total of 1 ampere (A)

Serial Port Specifications

9-pin D connector

1 2 3 4 5

6 7 8 9

Pin signals

1:Received line signal detector (RLSD)

2:Received data (RD)

3:Transmitted data (TD)

Appendix A Specifications

Image 86
Contents User’s Guide Apple Computer, Inc Apple Computer, Inc. All rights reserved Contents Using a Second Xserve G5 System to Install Server Software Updating or Installing Software on Xserve G5 SystemsInstalling or Restoring Software on Your Xserve G5 System Starting Up From an External FireWire Optical DriveContents Page Introducing Xserve G5 Preface Introducing Xserve G5 Xserve G5 Overview Your Server at a Glance-Front Panel On/standby button and light Your Server at a Glance-Back Panel Power socket Your Server at a Glance-Interior Battery Your Cluster Node Server at a Glance Drive module and lights Your Server at a Glance-Mounting Hardware Four-post brackets Page Preparing to Install Your Server Choose the Server’s Position in a RackElectrical Power Considerations for Cables Operating EnvironmentRack Stability Security Installing Your Server in a Rack This chapter shows you how to install the server in a rackGetting Ready to Install Determine the Position for the Server in the Rack Preparing the Server for Installation There is one screw on either Side of the serverInstalling Your Server in a Rack Installing Your Server in a Rack PCI-X card slots RAM slots Installing the Server in a Four-Post Rack or Cabinet Follow these steps to attach the server to the rack Some racks have Slide the brace Place the Server in the Rack Install the Cable-Management Arm and Cables Connect Cables to the Cable-Management Arm Attach the Cable-Management Arm to the Rack Remove and then reinstall the mounting screws one at a time Ethernet port Link lights Attach the Cable-Management Arm to the Support Brace It stored on the arm Clamp Shaped bracket Screw Power socket Gigabit Ethernet ports Installing Your Server in a Rack Installing the Server in a Short Four-Post Rack Some racks have Installing Your Server in a Rack Place the Server in the Rack Tighten the two thumbscrews to secure the server in the rack Installing the Server in a Two-Post Telco Rack Attach the cover to Installing Your Server in a Rack Connect Cables Directly to the Server Disconnecting Cables From the Server’s Back Panel Preparing the Server for Software Setup Using Your Server Starting Up the ServerMonitoring Status Lights and Other Indicators on the Server Working With Advanced Network ServicesEnabling Jumbo Ethernet Frames Controlling Access to a Connected Keyboard and MouseSetting Up a Virtual Local Area Network Vlan Shutting Down the System Remotely Working With an Uninterruptible Power Supply UPSChanging the System Language If the Server Has a Problem To shut down from a network computer without Server MonitorProblem Try this What to Do IfHard disk is erased or server Using Your Server Installing or Restoring Software on Your Xserve G5 System On Xserve G5 SystemsUsing a Second Xserve G5 System to Install Server Software To use a second Xserve G5 system and command-line toolsStarting Up From an External FireWire Optical Drive To start up from an external optical driveInstalling and Restoring From a Network Server Installing or Replacing Server Components Installing or Replacing an Apple Drive Module Follow these steps to install or replace a drive modulePress the drive module to pop out the handle Opening and Closing the Server Unscrew the two thumbscrews to release the server Pull the server out of the rack until it stops Adding Memory Follow these steps to install memory in the server Bank Installing a PCI-X Card or PCI Card About PCI-X Cards for the Server Installing a PCI-X Card or PCI CardFollow these steps to install a PCI-X card. or PCI card PCI-X card slots Slot covers Installing or Replacing Server Components Installing or Replacing Server Components Replacing the Battery Follow these steps to replace the lithium batteryInstalling or Replacing Server Components Optical Drive Specifications Processor and Memory SpecificationsDimensions and Operating Environment Ethernet SpecificationsSerial Port Specifications FireWire SpecificationsUSB Specifications System Clock and Battery Power SupplyPower Requirements for Devices You Can Connect Page Safety, Maintenance, Important Safety InformationProtecting Your Optical Drive Power SupplyHandling Your Computer Equipment Apple and the Environment Cleaning Your EquipmentCleaning the Server’s Case Health-Related Information About Computer UsePage High-Risk Activities Warning Battery Disposal InformationLaser Information Page
Related manuals
Manual 22 pages 48.7 Kb Manual 13 pages 5.38 Kb Manual 112 pages 31.08 Kb Manual 120 pages 41.36 Kb Manual 112 pages 39 Kb Manual 8 pages 22.47 Kb

G5 specifications

The Apple G5, introduced in June 2003, marked a significant advancement in personal computing with its innovative architecture and powerful performance. It was the first desktop computer to feature a 64-bit architecture, which allowed it to process larger amounts of data more efficiently than its 32-bit predecessors. The G5 was equipped with the IBM PowerPC 970 processor, which operated at speeds ranging from 1.6 GHz to 2.7 GHz, making it a formidable contender in the market for both personal and professional use.

One of the standout features of the G5 was its aluminum chassis, which not only gave it a sleek and modern look but also aided in heat dissipation. The innovative design allowed the G5 to maintain lower operating temperatures regardless of the loads it handled. The G5 was famous for its quiet operation, thanks to a temperature-controlled, variable-speed fan system that minimized noise during regular use while still providing adequate cooling during intensive tasks.

In terms of memory, the G5 could support up to 8 GB of RAM, utilizing DDR SDRAM technology that provided enhanced performance in multitasking and complex applications. For graphics, the G5 offered powerful options, including dedicated GPU support from NVIDIA and ATI, enabling users to perform demanding tasks such as video editing and 3D graphics rendering with ease.

The connectivity options on the G5 were well thought out, including built-in USB 2.0 and FireWire 800 ports, which supported high-speed data transfer for external devices. In addition, the G5 featured an Ethernet port for networking capabilities, making it suitable for both home and office environments.

The G5 also ran on Mac OS X, which was optimized to take full advantage of its hardware capabilities. With its Unix-based foundation, Mac OS X provided users with a stable and secure operating environment, complete with a plethora of software applications tailored for creative professionals, including those in graphic design, video editing, and audio production.

Overall, the Apple G5 was a groundbreaking machine that successfully combined advanced technology, stylish design, and robust performance, earning a dedicated following among professionals and enthusiasts alike. Its legacy continues to influence Apple's approach to desktop computing, marking a pivotal moment in the evolution of personal computers.