34
Be careful not to overtighten the flange screws. Doing so could change the shape of the cover. Take special care if you are using a power screwdriver or drill.
Temporarily place the mounting template over the two posts on the cover.
Attach the cover to the two front rack posts using four of the screws provided.
Some racks have prethreaded holes and some have square holes that take clips with attached nuts. You may need to insert a clip into the appropriate hole before attaching the screw. Several of these clips, also called “cage nuts,” are included with the mounting hardware.
Some racks have | Other racks use various |
prethreaded holes. | types of nuts to secure |
| equipment. |
3At the back of the server, position the small bracket inside the server’s cover so that the head of one rivet is facing the side of the cover.
Note: Start on the left side of the server (when facing the back). This makes installing the