44
7Verify that the arm’s position is correct by moving the arm inward so that it swings under the cover of the server.
If the arm hits the cover or is not level as you move it, you need to adjust its position by unscrewing one or both mounting screws and moving the arm up or down slightly until it is level and moves smoothly under the server’s cover.
8Connect the cables to the back panel of the server.
Power socket | Gigabit Ethernet ports (2) | FireWire 800 ports (2) |
Serial console port | USB 2.0 ports (2) |
Important: When connecting Ethernet cables, connect a cable to the lower Ethernet port (port 1) first.
Ethernet port 2
2
Ethernet port 1
1
Link lights | Activity lights |
If you connect only one Ethernet cable, make sure to connect it to port 1.
See “Connect Cables Directly to the Server” on page 54 for more information about connecting cables.