Tripp Lite 1400-3000 VA owner manual Storage, Service

Page 11

Storage and Service

Storage

Before storing your UPS, turn it completely OFF: with the UPS ON and receiving utility power, press and hold the “ON/OFF/STANDBY” button for one second (an alarm will beep once briefly after the interval has passed); then, unplug the UPS from the wall outlet. If you store your UPS for an extend- ed period of time, recharge the UPS batteries once every three months: plug the UPS into a wall out- let; allow it to charge for 12 hours; and then unplug it and place it back in storage. Note: after you plug the UPS in, it will automatically begin charging its batteries; however, it will not supply power to its outlets (see Quick Installation section). If you leave your UPS batteries discharged for an extended period of time, they will suffer a permanent loss of capacity.

Service

Before returning your UPS for service, follow these steps:

1.Review the installation and operation instructions in this manual to ensure that the service problem does not originate from a misreading of the instructions. Also, check that the UPS System's circuit breaker(s) are not tripped. This is the most common cause of service inquiries which can be easily remedied by following the resetting instructions in this manual.

2.If the problem continues, do not contact or return the UPS to the dealer. Instead, call Tripp Lite at (773) 869-1233. A service technician will ask for the UPS's model number, serial number and purchase date and will attempt to correct the problem over the phone.

3.If the problem requires service, the technician will issue you a Returned Material Authorization (RMA) number, which is required for service. If you require packaging, the technician can arrange to send you proper packaging. Securely pack the UPS to avoid damage during shipping. Do not use Styrofoam beads for packaging. Any damages (direct, indirect, special, incidental or consequential) to the UPS incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. UPS Systems shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the outside of the package. If the UPS System is within the 2-year warranty period, enclose a copy of your sales receipt. Return the UPS for service using an insured carrier to the address given to you by the Tripp Lite service technician.

Warranty Registration

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

11

Image 11
Contents Intelligent, Line-Interactive UPS Systems SmartPro RackmountUPS Connection Warnings Important Safety InstructionsBattery Warnings UPS Location WarningsPost Telecom Mounting Mounting RackMounting Tower Turn the UPS on Plug your equipment into the UPSUSB and RS-232 Serial Communications Buttons Front Panel Indicator Lights Front Panel Other UPS Features Rear Panel Basic Operation Storage ServiceReplace Front Panel ProcedureInteligentes e interactivos con la línea Manual del propietarioAdvertencias sobre la conexión de equipos Instrucciones de seguridad importantesAdvertencias sobre la ubicación del UPS Advertencias sobre la conexión del UPSMontaje de 2 postes Telecomunicaciones Montaje BastidorMontaje de 4 postes Montaje En torre Encienda el UPS Conecte sus equipos en el UPSConexión de batería externa Modelos exclusivos Comunicaciones USB y serie RS-232 Todos los modelosConexión de puerto EPO Todos los modelos Botón ON/OFF/STANDBY Encendido/Apagado/Reserva Botones Panel frontalLuces indicadoras Panel frontal Operación básica continúaOtras funciones del UPS Panel posterior Operación básica continúa Almacenamiento ServicioRecoloque el panel Frontal ProcedimientoNota sobre el rotulado Manuel du propriétaire Mises en garde Connexion déquipement Mises en garde Emplacement de lUPSDirectives de sécurité importantes Mises en garde Connexions de lUPSMontage sur 2 montants Télécom Montage BâtiBâti à quatre montants Montage Tour Mettre lUPS sous tension Connecter votre équipement à lUPSConnexion de batterie externe Modèles sélect Ports de communication de série USB Et RS-232Connexion au port EPO tous les modèles Boutons Panneau avant Voyants indicateurs Panneau avant Fonctionnement de base, suiteAutres caractéristiques de lUPS panneau arrière Fonctionnement de base, suite Entreposage ServiceReplacer le panneau avant Procédure