Tripp Lite SUINT1000XL, SUINT2000XL, SUINT3000XL owner manual Rear Panel

Page 7

Basic Operation (continued)

Front Panel Indicator Lights continued

“REPLACE BATT” LED: This red light will be lit and the UPS alarm will beep every 2 seconds if your UPS’s microprocessor detects a battery fault or if your UPS fails the automatic self-test (after you turn your UPS ON) and the UPS battery is less than fully charged. Let the UPS charge for 12 hours, then perform a second self test (Basic Operation—UPS Self-Test). If the light continues to stay on, contact Tripp Lite for service.

Rear Panel

220/230/240V IEC-320-C13

220/230/240V IEC-320-C14

220/230/240V IEC-320-C20

AC Receptacles: These receptacles provide your connected equipment with pure sine-waveAC output from theAC line during normal operation and from battery power during blackouts and severe brownouts. Power provided at these outlets is filtered to protect connected equipment against damaging surges and line noise.

Input Receptacle (Model SUINT1000XL Only): Plug the UPS sys- tem into utility power by connecting a user-supplied power cord to the IEC-320-C14 input receptacle. The power cord should have an IEC- 320-C13 connector on one end and a plug appropriate for your local site's utility outlets on the other end. The UPS system does not include an input power cord.

Input Receptacle (Models SUINT2000XL and SUINT3000XL Only): Plug the UPS system into utility power by connecting a user- supplied power cord to the IEC-320-C20 input receptacle. The power cord should have an IEC-320-C19 connector on one end and a plug appropriate for your local site's utility outlets on the other end. The UPS system does not include an input power cord.

Input Circuit Breaker Switch: This resettable breaker prevents high input current from damaging the UPS or the attached load. If this breaker trips, make sure your UPS is connected to AC power of the proper voltage before resetting the circuit breaker by pushing the breaker switch in.

Fan: The fan cools the UPS’s internal components. It is always on when line power is present.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Th Street Chicago, IL 60609 USA SmartOnlineUPS Location Warnings Important Safety InstructionsConnection and Start-Up Plug your UPS into an electrical outletPlug your equipment into your UPS Turn your UPS onSerial Port Connection External Battery Pack ConnectionFront Panel Switches ImportantBasicOperationSafety InstructionsFront Panel Indicator Lights Basic Operation Rear Panel Communications Restart the UPS. If the problem persists ON/Test Switch Basic OperationOr low for the UPS to operate in Bypass This indicates that utility power is too highStorage ServiceTh Street Chicago, IL 60609 EE.UU Manual del usuarioGuarde Estas Instrucciones Importantes instrucciones de seguridadEnchufe su equipo al sistema UPS Conecte su UPS en un tomacorrienteConexión y encendido Conexión del paquete de baterías externas Instalación opcionalEncienda su sistema UPS on Conexión de puerto serialLuces indicadoras del panel frontal Interruptores del panel frontalLuces indicadoras del panel frontal continuación Operación básica continuaciónPanel posterior Comunicaciones Panel posterior continuaciónEncendidas DERIVACIÓN, LÍNEA, Carga Condición Reemplazar bateríaEncendidas Batería BAJA, EN Batería Condición Batería bajaEncendidas DERIVACIÓN, Línea Localización de fallas continuaciónAlmacenamiento Servicio Almacenamiento y servicio continuaciónNota sobre el rotulado Th Street, Chicago, IL 60609 USA Guide de lutilisateurConservez CES Instructions EN UN Lieu SÛR Importantes consignes de sécuritéBranchez votre matériel dans votre système UPS Branchez votre ASI dans une prise de courant électriqueConnexion et démarrage Connexion de port série Installation suiteInstallation optionnelle Mettez votre système UPS en marcheCommutateurs du panneau avant ImExploitationortantSafdetybaseInstructionsVoyants du panneau avant Voyants du panneau avant suite Exploitation de base suitePanneau arrière Panneau arrière suite Problème persiste, consultez le Problème Remplacez la batterieLe système UPS Dépannage suiteEntretien EntreposagePage Page 200602179

SUINT1000XL, SUINT3000XL, SUINT2000XL specifications

Tripp Lite’s SUINT series of uninterruptible power supply (UPS) systems—specifically the SUINT1000XL, SUINT2000XL, and SUINT3000XL—are designed to provide reliable backup power protection for sensitive electronics and critical equipment in various settings, from home offices to data centers.

Each model in the SUINT series boasts a robust Pure Sine Wave output, which ensures that connected devices receive clean and stable power. This is particularly important for equipment sensitive to voltage fluctuations, helping to prevent damage and malfunction. The pure sine wave output mimics the electrical waveform of utility power, making these UPS systems suitable for a variety of devices, including computers, networking equipment, and even certain audio/video devices.

One of the key features of the SUINT series is its extended runtime capabilities. Users can select interchangeable external battery packs for additional runtime, making these UPS systems versatile for longer outages. The SUINT1000XL provides up to 1000VA capacity, while the SUINT2000XL and SUINT3000XL offer 2000VA and 3000VA of capacity, respectively. This flexibility allows users to choose the model that best meets their power requirements.

All three models feature an LCD display that provides real-time monitoring of vital UPS functions, including battery status, load level, and estimated runtime. This user-friendly interface allows for prompt assessment of power conditions and easy navigation through settings and configurations.

In addition, the SUINT series includes automatic voltage regulation (AVR) technology to stabilize output voltage, ensuring that your equipment receives consistent power despite fluctuations in the input voltage. This technology is crucial in areas with unreliable power supply, enhancing the reliability of the UPS.

The SUINT series also emphasizes communication and adaptability. With USB and serial ports for connection to a computer, users can monitor the UPS status via software. This allows for scheduled shutdowns and monitoring under critical conditions, enhancing the overall safety and efficiency of the connected devices.

Compatibility with Tripp Lite's PowerAlert software enables advanced power management features, ensuring that users can manage their system for optimal performance.

Overall, the Tripp Lite SUINT1000XL, SUINT2000XL, and SUINT3000XL are robust UPS solutions, providing necessary power protection, user-friendly features, and advanced technologies to keep critical equipment running smoothly during power disturbances. Their combination of pure sine wave output, extended runtime, AVR technology, and communication capabilities make them essential for safeguarding sensitive electronics.
Top Page Image Contents