Tripp Lite AGSM4878 Important Safety Instructions, UPS Location Warnings, UPS Connection Warnings

Page 2

201109267 93-2259-EN.qxd 10/21/2011 3:39 PM Page 2

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains important instructions that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. Failure to heed these warnings will void your warranty.

UPS Location Warnings

Use caution when lifting your UPS. Because of the considerable weight of all rackmount UPS systems, at least two people should assist in lifting and installing them.

Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight.

For best performance, the ambient temperature near your UPS should be between 0° C and 40° C (between 32° F and 104° F).

Leave adequate space around all sides of the UPS for proper ventilation. Do not obstruct its vents or fan openings.

UPS Connection Warnings

The UPS contains its own energy source (battery). The output terminals may be live even when the UPS is not connected to an AC supply.

Connect your UPS to a properly grounded AC power outlet. Do not modify the UPS’s plug in a way that would eliminate the UPS's connection to ground. Do not use adapters that eliminate the UPS’s connection to ground.

Do not plug your UPS into itself; this will damage the UPS and void your warranty.

If you are connecting your UPS to a motor-powered AC generator, the generator must provide filtered, frequency-regulated computer-grade output.

Equipment Connection Warnings

Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life-support device.

Do not connect surge suppressors or extension cords to the output of your UPS. This might overload the UPS and will void the surge suppressor and UPS warranties.

Battery Warnings

Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or batteries. Do not short or bridge the battery terminals with any object. Unplug and turn off the UPS before performing battery replacement. Use tools with insulated handles. There are no user-serviceable parts inside the UPS. Battery replacement should be performed only by authorized service personnel using the same number and type of batteries (sealed Lead-Acid). The batteries are recyclable. Refer to your local codes for disposal requirements or in the USA only call 1-800-SAV-LEAD or 1-800-8-BATTERY (1-800-8-228-8379) or visit www.rbrc.com for recycling information. Tripp Lite offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.). Visit Tripp Lite on the Web at www.tripplite.com to locate the specific replacement battery for your UPS.

During hot-swap battery replacement, the UPS will not provide backup power in the event of a blackout or other power interruptions.

Do not operate UPS without batteries.

When adding external battery packs to select models with external battery pack connectors, connect only Tripp Lite-recommended battery packs of the correct voltage and type. Do not connect or disconnect battery packs when the UPS is operating on battery power.

2

Image 2
Contents Intelligent, Line-Interactive UPS Systems Th Street, Chicago, IL 60609 USAUPS Location Warnings Important Safety InstructionsBattery Warnings UPS Connection WarningsMounting Rack Post MountingMounting Tower Post Telecom MountingTurn the UPS on External Battery Connection select models Buttons Front Panel ON/OFF/STANDBY ButtonIndicator Lights Front Panel Other UPS Features Rear Panel Basic Operation Service Storage2U UPS Models Procedure1U UPS Models Sistemas de UPS Inteligentes e Interactivos en Línea Th Street Chicago, IL 60609 USAAdvertencias sobre la conexión del UPS Instrucciones de seguridad importantesAdvertencias sobre la ubicación del UPS Advertencias sobre la conexión de equiposMontaje Bastidor Montaje de 4 postesMontaje de 2 postes Telecomunicaciones Montaje en bastidor continúaMontaje En torre Tolos los modelos de UPSEncienda el UPS Conexión de batería externa modelos exclusivos Comunicaciones USB y serie RS-232 todos los modelosConexión de puerto EPO todos los modelos Botones Panel frontal Botón ON/OFF/STANDBY Encendido/Apagado/ReservaOperación básica continúa Luces indicadoras Panel frontalOtras funciones del UPS Panel posterior Operación básica continúa Almacenamiento ServicioModelos de UPS de 2U ProcedimientoModelos de UPS de 1U Nota sobre el rotuladoTh Street Chicago, IL 60609 É.-U Systémes UPS intelligent, en attente activeNuméro de la série de lagence Mises en garde Connexions de lUPS Mises en garde Emplacement de lUPSDirectives de sécurité importantes Mises en garde Connexion déquipementMontage Bâti Bâti à quatre montantsMontage sur 2 montants Télécom Montage bâti suiteMontage Tour Tous les modèles dUPSFigure de la prise IEC320-C14 Connexion au port EPO tous les modèles Connexion de batterie externe modèles sélectBoutons Panneau avant Bouton ON/OFF/STANDBY Marche/Arrêt/AttenteFonctionnement de base, suite Voyants indicateurs Panneau avantAutres caractéristiques de lUPS panneau arrière Fonctionnement de base, suite Service EntreposageModèles UPS 2U ProcédureRemarque sur étiquetage               
Related manuals
Manual 13 pages 45.62 Kb

AG-0019, AG-0018, AGSM7515RM1U, AGSM4878, AGSMX500RT1U specifications

Tripp Lite is a leading manufacturer of power and connectivity solutions, and their range of products demonstrates a strong commitment to delivering reliability and performance. Among their notable offerings are the AGSM7515RM1U, AG-0018, AGSM4878, AG-0019, and AGSMX500RT1U models, which provide robust solutions for various applications.

The Tripp Lite AGSM7515RM1U is a 15U rackmount cabinet designed for optimal airflow and cooling. Its robust steel construction ensures durability, while the front and rear locking doors offer enhanced security for valuable equipment. The cabinet is equipped with adjustable mounting rails that accommodate a variety of devices and accessories. The included cooling fans are strategically positioned to maintain a stable temperature, reducing the risk of overheating.

The AG-0018 model is a versatile power strip that provides essential surge protection. It features eight outlets, making it ideal for managing multiple devices in a single location. With a built-in circuit breaker and EMI/RFI noise filtering, this power strip enhances equipment longevity and performance. Its compact design allows for easy installation in various environments, including workstations, server rooms, and home offices.

Tripp Lite's AGSM4878 is a specialized rack shelf designed to hold heavy equipment. With a weight capacity of up to 300 pounds, it is ideal for servers, UPS systems, and other substantial devices. The open design facilitates airflow and reduces heat build-up, while the installation is made simple by its compatibility with standard 19-inch racks. This shelf is essential for optimizing space and maintaining organized equipment layouts.

The AG-0019 is a high-performance HDMI extension cable that supports 4K resolution, ensuring crystal-clear video and audio transmission. Its durable construction and gold-plated connectors enhance connectivity and resistance to signal loss. This cable is perfect for professional AV applications, offering reliable performance in settings such as conference rooms and media centers.

Lastly, the AGSMX500RT1U is a compact UPS system that delivers reliable battery backup and surge protection for sensitive electronic equipment. With a power capacity of 500VA/300W, it provides ample runtime during power outages, allowing for safe data saving and system shutdown. Features include a USB port for management software integration and multiple outlets to accommodate various devices.

Together, these Tripp Lite products exemplify innovation and practicality, catering to the demands of modern technology environments. Each model is engineered to ensure maximum performance, longevity, and security, making them essential components for businesses and individuals alike.