Tripp Lite AGSM4878, AGSMX500RT1U, AGSM7515RM1U, AG-0019 Buttons Front Panel, ON/OFF/STANDBY Button

Page 7

201109267 93-2259-EN.qxd 10/21/2011 3:39 PM Page 7

Basic Operation

Buttons (Front Panel)

“ON/OFF/STANDBY” Button

•To turn the UPS ON: with the UPS plugged into a live AC wall outlet*, press and hold the “ON/OFF/STANDBY” button for one second.** Release the but- ton. If utility power is absent, you can “cold-start” the UPS (i.e.: turn it ON and supply power for a limited time from its batteries***) by pressing and holding the “ON/OFF/STANDBY” button for one second.**

•To turn the UPS OFF: with the UPS ON and receiving utility power, press and hold the “ON/OFF/STANDBY” button for one second.** Then unplug the UPS from the wall outlet. The UPS will be completely OFF.

*After you plug the UPS into a live AC outlet, the UPS (in “Standby” mode) will automatically charge its batteries, but will not supply power to its outlets until it is turned ON. ** The alarm will beep once briefly after the indicated interval has passed. *** If fully charged.

“MUTE/TEST” Button

To Silence (or “Mute”) UPS Alarms: briefly press and release the MUTE/TEST button.

To Run a Self-Test:with your UPS plugged in and turned ON, press and hold the MUTE/TEST button for two seconds.* Continue holding the button until the alarm beeps several times and the UPS performs a self test. See “Results of a Self-Test” below. Note: you can leave connected equipment on during a self-test. Your UPS, however, will not perform a self-test if the UPS is not turned on (see “ON/OFF/STANDBY” Button description).

CAUTION! Do not unplug your UPS to test its batteries. This will remove safe electrical grounding and may introduce a damaging surge into your network connections.

Results of a Self-Test:the test will last approximately 10 seconds as the UPS switches to battery to test its load capacity and battery charge.

•If the “OUTPUT LOAD LEVEL” LED remains lit red and the alarm continues to sound after the test, the UPS’s outlets are overloaded. To clear the overload, unplug some of your equipment and run the self-test repeatedly until the “OUTPUT LOAD LEVEL” LED is no longer lit red and the alarm is no longer sounding.

CAUTION! Any overload that is not corrected by the user immediately following a self-test may cause the UPS to shut down and cease supplying output power in the event of a blackout or brownout.

•If the “BATTERY WARNING” LED remains lit and the alarm continues to sound after the test, the UPS batteries need to be recharged or replaced. Allow the UPS to recharge continuously for 12 hours, and repeat the self-test. If the LED remains lit, contact Tripp Lite for service. If your UPS requires battery replacement, visit www.tripplite.com to locate the specific Tripp Lite replacement battery for your UPS.

*The alarm will beep once briefly after the indicated interval has passed.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Th Street, Chicago, IL 60609 USA Intelligent, Line-Interactive UPS SystemsUPS Connection Warnings Important Safety InstructionsBattery Warnings UPS Location WarningsPost Mounting Mounting RackPost Telecom Mounting Mounting TowerTurn the UPS on External Battery Connection select models ON/OFF/STANDBY Button Buttons Front PanelIndicator Lights Front Panel Other UPS Features Rear Panel Basic Operation Storage Service1U UPS Models Procedure2U UPS Models Th Street Chicago, IL 60609 USA Sistemas de UPS Inteligentes e Interactivos en LíneaAdvertencias sobre la conexión de equipos Instrucciones de seguridad importantesAdvertencias sobre la ubicación del UPS Advertencias sobre la conexión del UPSMontaje de 4 postes Montaje BastidorTolos los modelos de UPS Montaje en bastidor continúaMontaje En torre Montaje de 2 postes TelecomunicacionesEncienda el UPS Conexión de puerto EPO todos los modelos Comunicaciones USB y serie RS-232 todos los modelosConexión de batería externa modelos exclusivos Botón ON/OFF/STANDBY Encendido/Apagado/Reserva Botones Panel frontalLuces indicadoras Panel frontal Operación básica continúaOtras funciones del UPS Panel posterior Operación básica continúa Servicio AlmacenamientoNota sobre el rotulado ProcedimientoModelos de UPS de 1U Modelos de UPS de 2UNuméro de la série de lagence Systémes UPS intelligent, en attente activeTh Street Chicago, IL 60609 É.-U Mises en garde Connexion déquipement Mises en garde Emplacement de lUPSDirectives de sécurité importantes Mises en garde Connexions de lUPSBâti à quatre montants Montage BâtiTous les modèles dUPS Montage bâti suiteMontage Tour Montage sur 2 montants TélécomFigure de la prise IEC320-C14 Connexion de batterie externe modèles sélect Connexion au port EPO tous les modèlesBouton ON/OFF/STANDBY Marche/Arrêt/Attente Boutons Panneau avantVoyants indicateurs Panneau avant Fonctionnement de base, suiteAutres caractéristiques de lUPS panneau arrière Fonctionnement de base, suite Entreposage ServiceRemarque sur étiquetage ProcédureModèles UPS 2U               
Related manuals
Manual 13 pages 45.62 Kb

AG-0019, AG-0018, AGSM7515RM1U, AGSM4878, AGSMX500RT1U specifications

Tripp Lite is a leading manufacturer of power and connectivity solutions, and their range of products demonstrates a strong commitment to delivering reliability and performance. Among their notable offerings are the AGSM7515RM1U, AG-0018, AGSM4878, AG-0019, and AGSMX500RT1U models, which provide robust solutions for various applications.

The Tripp Lite AGSM7515RM1U is a 15U rackmount cabinet designed for optimal airflow and cooling. Its robust steel construction ensures durability, while the front and rear locking doors offer enhanced security for valuable equipment. The cabinet is equipped with adjustable mounting rails that accommodate a variety of devices and accessories. The included cooling fans are strategically positioned to maintain a stable temperature, reducing the risk of overheating.

The AG-0018 model is a versatile power strip that provides essential surge protection. It features eight outlets, making it ideal for managing multiple devices in a single location. With a built-in circuit breaker and EMI/RFI noise filtering, this power strip enhances equipment longevity and performance. Its compact design allows for easy installation in various environments, including workstations, server rooms, and home offices.

Tripp Lite's AGSM4878 is a specialized rack shelf designed to hold heavy equipment. With a weight capacity of up to 300 pounds, it is ideal for servers, UPS systems, and other substantial devices. The open design facilitates airflow and reduces heat build-up, while the installation is made simple by its compatibility with standard 19-inch racks. This shelf is essential for optimizing space and maintaining organized equipment layouts.

The AG-0019 is a high-performance HDMI extension cable that supports 4K resolution, ensuring crystal-clear video and audio transmission. Its durable construction and gold-plated connectors enhance connectivity and resistance to signal loss. This cable is perfect for professional AV applications, offering reliable performance in settings such as conference rooms and media centers.

Lastly, the AGSMX500RT1U is a compact UPS system that delivers reliable battery backup and surge protection for sensitive electronic equipment. With a power capacity of 500VA/300W, it provides ample runtime during power outages, allowing for safe data saving and system shutdown. Features include a USB port for management software integration and multiple outlets to accommodate various devices.

Together, these Tripp Lite products exemplify innovation and practicality, catering to the demands of modern technology environments. Each model is engineered to ensure maximum performance, longevity, and security, making them essential components for businesses and individuals alike.
Top Page Image Contents