Interfacing to a Host Computer
IrDA Interface
In addition to the standard Serial interface, your MLP 3040 may be equipped with an optional IrDA interface. IrDA interfaces are commonly found on many PDA’s and notebook computers. To communicate using the IrDA interface, “IrDA” must be selected in the Interface Menu as described on page 23.
The IrDA interface uses infrared light to provide a cable free, short range interface. Since the communications medium is light, it is
Whenever a host computer has established a connection with the printer, the Wireless Indicator will illuminate.
Note: The printer’s IrDA implementation makes use of IrCOMM rather than IrLPT. As a result, some host systems will require that the printer connection be established using a “COM” port rather than selecting “IrDA”. In most PDA’s, for instance, this will be “COM3”.
LCD Display
Wireless Indicator
IrDA Window
Figure 12 – Wireless Indicator & IrDA Window
Bluetooth® Interface
In addition to the standard Serial interface, your MLP 3040 may be equipped with an optional Bluetooth interface. Bluetooth interfaces are built into some PDA’s and may be added to most others. Bluetooth interfaces may also be added to notebook or desktop computers. To communicate using the Bluetooth® interface, “Bluetooth” must be selected in the Interface Menu as described on page 24.
The Bluetooth interface uses wireless, radio frequency signals to communicate, which eliminates the
The MLP 3040 Bluetooth interface acts as a “serial port adapter” operating as a “server”. Being a serial port adapter means, the printer may appear as a “Serial Device” when discovered, rather than as a “Printer”. Operating as a server, other devices such as a PDA or other host computer may initiate the connection to the printer.
34