Psion Teklogix MLP 3040 Series manual Print Promotion, Print Promo No, Printer Configuration

Printer Configuration

Print Promotion

Possible Values: No*, Yes

Print Promo No

This feature is only available in firmware version 2.8 or later.

When set to “Yes” this feature causes a previously stored graphic image with an ID value of “$” to be printed at the end of each print job.

This feature may be used to print a special logo or graphic image of a special sales promotion or other event that also needs to be enabled/disabled by the user in the field.

Note: In firmware version 2.9 and later, multiple graphic images may be stored with the ID values of “!”, “@”, “#”, “$”, “%”, “^”, “&”, “*”, “(“, and/or “)”. In this case, the printer will automatically cycle through each of these images printing one at the end of each print job.

Please refer to the MLP Series & PrintAbout Programmer’s Manual for more information on storing graphics and logos.

31