HP Process Resource Manager (PRM) manual Prmconfig command, M option requires a keyword argument

250Message Disable (-d) and enable (-e) are mutually exclusive. Specify only one on the command line.

Cause	You cannot disable and enable in the same command.
Action	Choose either -dor -e.
251 Message	Extra arguments at end of command line.
Cause	You provided more arguments than expected.
Action	Check command syntax for correct option usage.

286Message Manager arg for prmconfig -d or -e may only be DISK, APPL, CPU or MEM.

Cause	The Manager argument specified for the prmconfig -dor -ecommand is
	not a recognized keyword.
Action	Re-enter the command and either disable or enable all of the configured PRM
	managers or use a valid Manager argument to select the desired PRM manager
	to disable or enable.

287Message Both the Interval and Manager arguments are required for prmconfig -I.

Cause	Both of the required arguments were not entered with the interval option of the
	prmconfig command.
Action	Re-enter the command, supplying both the Interval and Manager arguments
	for the -Ioption. The Interval argument is number of seconds, and the Manager
	argument is the keyword MEM or APPL.

288Message Manager argument APPL or MEM is required for prmconfig -I or -L.

Cause	The Manager argument for the prmconfig -Ior -Lcommand is either
	missing or not a recognized keyword.
Action	Re-enter the command with a recognized keyword for the Manager argument.

289Message The Logarg argument for prmconfig -L may only be the keyword STOP.

	Cause	The optional Logarg argument for the prmconfig -Lcommand is not a
		recognized keyword.
	Action	Re-enter the command and either skip the Logarg argument or enter STOP for
		the Logarg argument.
291	Message	The -M option requires a keyword argument.
	Cause	The -Moption was used without an argument.
	Action	Use either CPUCAPON or CPUCAPOFF as an argument to -M.
292	Message	Unrecognized keyword argument for -M option.
	Cause	The entered argument to -Mis not valid.
	Action	Use either CPUCAPON or CPUCAPOFF as an argument to -M.

294Message Enabling of CPU cap only allowed when PRM CPU scheduler enabled.

Cause	Attempted to enable CPUCAPON mode when the PRM CPU manager is not
	active.
Action	Enable the CPU manager before enabling CPUCAPON mode.

295Message Could not set PRM cap; %s (HP-UX error message)

Cause The CPU manager is disabled.

prmconfig error messages 133