HP Process Resource Manager (PRM) manual Removing a Unix group’s PRM group assignment

1.Open the desired configuration file in a text editor.

2.Using the syntax shown below:

#!UXGRP:UNIX_GROUP_NAME:{GROUP (NONE)}

and explained in the section “Unix group record syntax” (page 77):

a.Add or modify a line specifying a Unix group name.

b.Add or modify the group—or replace it with (NONE).

3.Save the file and exit your editor.

4.Load the configuration using one of the following commands:

To initialize, moving user processes to the owners’ initial groups and moving applications to their assigned groups, use the command:

#prmconfig -i [-fconfigfile] {-s -c}

To keep the existing assignments of users, processes, and groups, use the command:

#prmconfig -k [-fconfigfile] {-s -c}

Use the -fconfigfile option to specify a file other than the default /etc/prmconf. The -soption displays warnings regarding the configuration file. (The -coption displays a subset of the -swarnings.)

5.Enable PRM’s application manager if it is not already enabled:

#prmconfig -e APPL

Alternatively, enable all PRM resource managers using prmconfig -ewithout any additional arguments:

#prmconfig -e

Removing a Unix group’s PRM group assignment

To remove a Unix group record:

1.Open the configuration file in a text editor.

2.Remove the line corresponding to the Unix group record you wish to remove. Unix group records have the following form:

#!UXGRP:UNIX_GROUP_NAME:{GROUP (NONE)}

3.Save the file and exit the text editor.

4.Load the configuration using one of the following commands:

To initialize, moving user processes to the owners’ initial groups and moving applications to their assigned groups, use the command:

#prmconfig -i [-fconfigfile] {-s -c}

To keep the existing assignments of users, processes, and groups, use the command:

#prmconfig -k [-fconfigfile] {-s -c}

Use the -fconfigfile option to specify a file other than the default /etc/prmconf. The -soption displays warnings regarding the configuration file. (The -coption displays a subset of the -swarnings.)

5.Enable PRM’s application manager if it is not already enabled:

#prmconfig -e APPL

Alternatively, enable all PRM resource managers using prmconfig -ewithout any additional arguments:

#prmconfig -e

78 Configuring and enabling PRM on the command line