Q-Logic FC0054607-00 A manual Using Console OS, VSphere Client Configuration

3–Configuration

Identifying QLogic Adapters on VMware ESX/ESXi 4.0

To identify QLogic Fibre Channel and Converged Network Adapters using vSphere:

1.Start vSphere Client and select the host you want.

2.Click the Configuration tab to bring the Configuration page to the front.

3.Under Hardware on the left, click Storage Adapters.

A list of all storage adapters configured on the system appears, including QLogic Fibre Channel and Converged Network Adapters, as shown in Figure 3-1.

Figure 3-1 vSphere Client Configuration Page

Using Console OS

You can use the console OS to identify QLogic Fibre Channel and Converged Network Adapters on a VMware ESX/ESXi 4.0 system.

3-2 FC0054607-00 A