| Software Installation |
9.Click on OK to save the port settings, and then click on OK in the Property window to finish the port settings procedure.
Using MOXA PComm Utility
The PComm Diagnostic program is a useful tool for checking the status of MOXA’s multiport boards. The program can be used to test internal and external IRQ, TxD/RxD, UART, CTS/RTS, DTR/DSR, etc. Use this program to ensure that your MOXA boards and ports are working properly.
To start the program, click on Start # Programs # PComm Lite 2000(XP Ver 1.2) # PComm Diagnostic.
NOTE
The PComm Lite software can downloaded for free from Moxa’s website at
www.moxa.com/support/free_downloads.htm.
Using Event Log
To use the Event Log to check the installation of your MOXA boards, click on Start # Settings
#Control Panel # Administrative Tools # Event Viewer to enter the Event Viewer utility. Look under the System category to find the latest information relevant to MOXA’s drivers.