CP-102U/UL User’s Manual | Software Installation |
F5 Group Edit
This is a convenient function that allows you to edit the configuration of several ports at one time as a group.
Loading the Driver
After completing the setup procedure, run BIN\DP-DRV.EXEfrom the DOS prompt to load the driver. The driver will automatically detect the boards that have already been installed. If one or more board is detected, you will see a message similar the following:
Smartio/Industio Family DOS driver Version 1.5
Setup driver …
CP-102U/UL series (Bus= x ,Dev=y) : OK!
Device driver setup O.K.
This means that the CP-102U/UL Series driver has been installed properly. At this point, you may execute applications that support API-232 functions, or start developing applications using the API-232 library.
Unloading the Driver
To unload (release) the driver from memory, type DP-DRV/Qat the DOS prompt and then press Enter.
