Moxa Technologies CP-102U/UL user manual Continue from in the next section, Configuring the Ports

CP-102U/UL User’s Manual Software Installation

6.Select MOXA Smartio/Industio Family multiport board in the Select OEM Option window, and then click on OK to start installing the driver.

7.The Moxa Smartio/Industio Configuration Panel window appears. Click on Add to open the Property configuration window to change port settings and set advanced FIFO configuration options.

8.Continue from Step 3 in the next section, “Configuring the Ports.”

Configuring the Ports

Follow the instructions in this subsection if the CP-102U/UL Windows NT driver is already installed, and you wish to re-configure a board’s ports or configure the ports of a newly installed board. In addition to the procedures listed below, you may also click on Start # Programs # MOXA Utility # MOXA Smartio/Industio Configuration Panel # Property, and then refer to the instructions in the previous section, “Installing the Driver for the First Time.”

1.Open the Control Panel, click on the Network icon, and then select the Adapters tab. Click on MOXA Smartio/Industio Family Adapter to highlight it, and then click on Properties.

3-37