Moxa Technologies CP-102U/UL Click on Remove Click on Close, and then restart the system

CP-102U/UL User’s Manual Software Installation

Removing the Driver

To remove the CP-102U/UL driver:

1.Open the Control Panel, click on the Network icon, and select the Adapters tab.

2.Click on MOXA Smartio/Industio Family Adapter in the Network Adapters list to highlight it.

3.Click on Remove.

4.Click on Close, and then restart the system.

Updating the Driver

To update the CP-102U/UL driver:

1.Remove the current driver (see the previous subsection for instructions).

2.Restart the system.

3.Install the new driver. Refer to the “Installing the Driver for the First Time” section for instructions.

3-42