Moxa Technologies DE-211 manual Wire RS-485 Terminal Block Wiring

Page 21

Using the Optional Terminal Block

4-wire RS-485 Terminal Block Wiring

NOTE: Use a flathead screwdriver to tighten the two attachment screws that connect the terminal block to NPort Express.

2-wire RS-485 Terminal Block Wiring

NOTE: Use a flathead screwdriver to tighten the two attachment screws that connect the terminal block to NPort Express.

3-7

Image 21

Contents NPort Express NPort Express Moxa Internet Services Table of Contents Introduction Product Specifications FeaturesOS Supported Package Checklist Front/Top/Rear/Bottom Panel Views Page Overview LED IndicatorsDIN Rail HousingWall Mount Page DIP Switch Settings Serial InstallationRS-232 Console Female DB25 Connector PinoutRS-232 Wiring Page Using a DB25 Connector Using the Optional Terminal Block RS-422 WiringUsing a DB25 Connector RS-485 WiringWire RS-485 Terminal Block Wiring Enabling a Termination Resistor Enabling the Built-In 120 Ω Terminator Enabling a User-Supplied Terminator Ethernet Installation Connecting to the Ethernet PortConnecting to a Hub or Switch Connecting to a PC Using the Power Adapter Power ConnectionImportant Notice Using Power Over SerialPower Status Check Page EMC Declaration of ConformityPage NPort Express Problem Report FormPage Return Procedure