Moxa Technologies DE-211 manual Housing, DIN Rail

Page 12

Housing

DIN Rail

For many industrial applications, you will find it convenient to use the DIN Rail attachments, as shown below.

STEP 1: Use 2 screws per ear to attach DIN Rail mounts to each of NPort Express’s two ears.

STEP 2: Insert the top of the DIN Rail into slot A of the DIN Rail mount.

STEP 3: Push the bottom of NPort Express so that the bottom of the DIN Rail snaps into slot B of the DIN Rail mount.

NOTE: The Din Rail mounting kit is an optional accessory.

To remove NPort Express from the DIN Rail, simply reverse Steps 2 and 3 above by grasping the bottom of the NPort Express unit with both hands, and then using your fingers to pull down slightly on the DIN Rail mounts at slot B. This releases the bottom of the DIN Rail from the DIN Rail mount.

2-2

Image 12
Contents NPort Express NPort Express Moxa Internet Services Table of Contents Introduction Features Product SpecificationsOS Supported Package Checklist Front/Top/Rear/Bottom Panel Views Page LED Indicators OverviewHousing DIN RailWall Mount Page Serial Installation DIP Switch SettingsFemale DB25 Connector Pinout RS-232 ConsoleRS-232 Wiring Page RS-422 Wiring Using a DB25 Connector Using the Optional Terminal BlockRS-485 Wiring Using a DB25 ConnectorWire RS-485 Terminal Block Wiring Enabling a Termination Resistor Enabling the Built-In 120 Ω Terminator Enabling a User-Supplied Terminator Ethernet Installation Connecting to the Ethernet PortConnecting to a Hub or Switch Connecting to a PC Power Connection Using the Power AdapterUsing Power Over Serial Important NoticePower Status Check Page Declaration of Conformity EMCPage Problem Report Form NPort ExpressPage Return Procedure