Moxa Technologies DE-211 manual Power Connection, Using the Power Adapter

Page 27

5

Power Connection

We discuss the following topics:

¾Using the Power Adapter

¾Using Power Over Serial

¾Power Status Check

Using the Power Adapter

Take the following steps to connect NPort Express’s power adapter.

1.Plug the power adapter’s DC plug into NPort Express’s DC-IN jack.

2.Plug the power adapter into an electrical outlet.

Note that there is no on/off switch. The server turns on as soon as the connected power adapter is plugged into a live outlet. The red PWR light on NPort Express’s top panel will glow to indicate that it is receiving power.

Image 27

Contents NPort Express NPort Express Moxa Internet Services Table of Contents Introduction Product Specifications FeaturesOS Supported Package Checklist Front/Top/Rear/Bottom Panel Views Page Overview LED IndicatorsDIN Rail HousingWall Mount Page DIP Switch Settings Serial InstallationRS-232 Console Female DB25 Connector PinoutRS-232 Wiring Page Using a DB25 Connector Using the Optional Terminal Block RS-422 WiringUsing a DB25 Connector RS-485 WiringWire RS-485 Terminal Block Wiring Enabling a Termination Resistor Enabling the Built-In 120 Ω Terminator Enabling a User-Supplied Terminator Ethernet Installation Connecting to the Ethernet PortConnecting to a Hub or Switch Connecting to a PC Using the Power Adapter Power ConnectionImportant Notice Using Power Over SerialPower Status Check Page EMC Declaration of ConformityPage NPort Express Problem Report FormPage Return Procedure