Moxa Technologies DE-211 manual Front/Top/Rear/Bottom Panel Views

Page 9

Front/Top/Rear/Bottom Panel Views

1. Female DB25 serial port

2. DIN Rail screw holes

3. Wall mount screw holes

4. RJ45 10BaseT Ethernet port

5. Reset button—press continuously for

a. 3 sec to erase password After 3 sec, the ready LED will flash on/off every half second. Release the reset button at this time to erase password.

b. 10 sec to load factory defaults

After 10 sec, the ready LED will flash on/off every fifth of a second. Release the reset button at this time to load factory defaults.

6. DIP Switches

7. Power input

8. Rubber base pads

1-5

Image 9

Contents NPort Express NPort Express Moxa Internet Services Table of Contents Introduction Product Specifications FeaturesOS Supported Package Checklist Front/Top/Rear/Bottom Panel Views Page Overview LED IndicatorsDIN Rail HousingWall Mount Page DIP Switch Settings Serial InstallationRS-232 Console Female DB25 Connector PinoutRS-232 Wiring Page Using a DB25 Connector Using the Optional Terminal Block RS-422 WiringUsing a DB25 Connector RS-485 WiringWire RS-485 Terminal Block Wiring Enabling a Termination Resistor Enabling the Built-In 120 Ω Terminator Enabling a User-Supplied Terminator Ethernet Installation Connecting to the Ethernet PortConnecting to a Hub or Switch Connecting to a PC Using the Power Adapter Power ConnectionImportant Notice Using Power Over SerialPower Status Check Page EMC Declaration of ConformityPage NPort Express Problem Report FormPage Return Procedure