Pelco CM6800E-48X8 manual Operate Sequences, To move through the sequence one camera at a time

OPERATE SEQUENCES

You can run a scratchpad sequence from an individual monitor or a system sequence on any monitor accessible from the keyboard. When running a sequence, any cameras not accessible to the keyboard will be bypassed.

A sequence runs continuously until a system operator selects a different camera, or an event timer starts another sequence or macro.

KBD100/200A/300A KEYBOARDS		KBD960/KBR960 KEYBOARDS
Run a Sequence		Run a Sequence
1.	Enter a sequence number (1-32). Skip this step to run a	1.	Select	.
	scratchpad sequence.	2.	Enter a sequence number (1-32 for a system sequence; 0 for
2.	Press and hold the NEXT or PREV key to move forward or
			the scratchpad sequence).
	backward through the sequence.	3.	Select	SEQ to start the sequence.

To move through the sequence one camera at a time:

	Press the NEXT key to move forward.	OR
	Press the PREV key to move backward.	1.	Select	.
Pause a Sequence		2.	Select SEQ	to enter the Sequence Menu.
1.	Press the HOLD key; monitor displays H.	3.	Enter a sequence number (1-32).
2.	Press the HOLD key to resume.		OR
Stop a Sequence			Select	or	to scroll through available sequences.
1.	Enter a camera number.	4.	Select	or	to start the sequence.
2.	Press the CAM key.	NOTE: You can define a function key to run a sequence. Refer to
		the KBD960 Keyboard Installation/Operation Manual for
		instructions.

Pause a Sequence

1. Select .

2. Select or to resume.

Stop a Sequence

1. Select .

OR

1. Enter a camera number.

2. Press the CAM key.

C1528M-F (6/05) 67