Pelco CM6800E-48X8 manual Macro Commands, Description Specify Fields, Auxiliary Notes

MACRO COMMANDS

Table H provides a description of each macro command and the additional fields required for each command. Refer to the Macro section for instructions on programming macros.

Table H. Macro Commands

Command	Description	Specify	Field(s)
GON	Activate an auxiliary.	Auxiliary	Command #
GOFF	Turn off an auxiliary.	Auxiliary	Command #
Auxiliary Notes:
• “Global” includes both internal and external auxiliaries.
• Auxiliaries on the rear panel of the CM6800E Matrix Switcher are activated by global auxiliary numbers 1, 2 and 3.
CON	Activate a camera auxiliary.	Camera auxiliary	Command #
		Camera	Camera
		Monitor	Monitor
COFF	Turn off a camera auxiliary.	Camera auxiliary	Command #
		Camera	Camera
		Monitor	Monitor
SEQ	Start a sequence. A sequence runs continuously until a system operator selects	Sequence	Command #
	a different camera, or an event timer starts another sequence or macro.
		Monitor	Monitor
SWT	Switch a camera to a monitor.	Camera	Camera
		Monitor	Monitor
COPY	Copy a camera view to a monitor.	Monitor to copy from	Command #
		Monitor to copy to	Monitor
GO TO	Go to step number specified.	Step	Command #
LOOP	Loop a macro.	0 = loop continuously	Command #
		1-999 = loop the specified
		number of times
?AUX	Check a local auxiliary; if the auxiliary is active, the next step is executed; if	Local auxiliary	Command #
	the auxiliary is not active, the next step is skipped.
?ALM	Check an internal alarm; if the alarm is active, the next step is executed; if	Alarm	Command #
	not, the next step is skipped.
?SW	Check whether a camera is displayed on a monitor; if it is, the next step is	Camera	Camera
	executed; if not, the next step is skipped.
		Monitor	Monitor
STPM	Stop a macro.	Macro	Command #
END	Exit the macro; no further steps are executed. Any macro or sequence started	None	None
	by this macro will continue to run.
DON	Displays on-screen text on the specified monitor.	Monitor	Monitor
DOFF	Removes on-screen text from the specified monitor.	Monitor	Monitor
MSWT	Switch a camera connected through the multiplexer.	Camera to switch◆	Command #
		Multiplexer input	Camera
		Monitor	Monitor
PIPB	Display multiplexer picture-in-picture view with the	Background camera◆	Command #
	designated camera in the background.
		Multiplexer input	Camera
		Monitor	Monitor
PIPF	Display multiplexer picture-in-picture view with the	Foreground camera◆	Command #
	designated camera in the foreground.
		Multiplexer input	Camera
		Monitor	Monitor

◆For multiplexer functions, the camera number is the number of the video input on the multiplexer. The multiplexer input number is the number of the video input on the rear panel of the CM6800E.

(Continued on next page)

76 C1528M-F (6/05)